Model #25374813408 KENMORE Top-Mount Refrigerator

  • Doors
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Icemaker

A:

Thank you for your question This certainly is not a good time of the year to be without ice. Allow me to assist please, let us check the obvious first. Temperature not to cold in the freezer. Vents are clear and not blocked in freezer. The water filter has been changed and the water quality is good. If yes to all three then we need to check the module. . There are some test terminals on the icemaker module, that may help determine what the problem is. To access the module, pull the front cover off of the icemaker. You will now see the module and the terminals will be marked (I'm sending you a image below). Use a well insulated jumper and place it between the L-V terminals. Be careful this is a hot (live) check. With the jumper in place, water should flow to the icemaker. If water does flow, the icemaker will need to be replaced. If no water flows, the water valve will probably need to be replaced Here is a video to help the model is different, the repair is the same.

If you have more questions reply to this post.

Thank you for choosing Manage My life.

Read More
dtova00 -
Sears Technician
September 09, 2013
Q:

Is there a way to change the side that a refrigerator door opens?

A:

There are many different models of 18 cu. ft. Kenmore top mount refrigerators. Almost all top mount refrigerators will allow you to reverse the door swing. Without a model number, I am not able to provide the specific directions for your model. The directions are normally in the owner's manual. If you do not have your owner's manual, you can use the search tool on our Manage My Home website to find it. We have most of the manuals for Kenmore refrigerators.

I provided the directions to reverse the door swing for one common type of Kenmore 18 cu. ft. refrigerator in the image below. The model number of this refrigerator is 253.74813408. If you refrigerator begins with 253.7481 . . ., you can likely use this procedure to reverse your door swing. If you have a different model, try to look up your owner's manual on our website or resubmit your question with the model number and we will help you further.

The model number is normally on the top of the right inside wall of the refrigerator. It will normally be in a format such as the model above or it will start with 106. . . instead of 253. . .

Read More
Lyle W -
Sears Technician
September 01, 2009
Q:

How to remove icemaker from Kenmore refrigerator?

A:

There are 3 screws securing the ice maker to the side wall of the freezer. Remove the 2 screws above the ice maker and the 1 screw below the ice maker. Disconnect the ice maker wire harness from the rear wall and pull the ice maker out. It is not necessary to remove the fill tube if it's not in you way. If you want to remove the fill tube, it will have to be pulled out from the rear of the refrigerator.

Read More
Joey S -
Sears Technician
May 14, 2008

Top Parts