Model #25371122102 KENMORE Top-Mount Refrigerator

  • Doors
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Model #25371122102 control box detail and installation.

A:

I can understand your need for some type of instructions on how to properly install the control box on your refrigerator. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
May 11, 2013
A:

I did some research on the unit and I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
May 11, 2013
A:

Water is probably leaking through that control box but that component is not the likely cause of your problem.

 

Your symptoms point to a clogged defrost drain tube in the evaporator component at the back of the freezer cavity.  If that drain tube below the evaporator is clogged, the condensate from the defrost cycle will leak down through the air damper and into the refrigerator.

 

I recommend that you unplug the refrigerator and remove the items from the freezer. Remove the shelf and bottom panel of the freezer if present. Remove the ice maker if you have one installed. You can then remove the inside back panel of that freezer. You will see a drain pan under the evaporator fins. That drain pan has a drain hole that is probably frozen. Thawing that area out and clearing that drain tube should fix you problem. After you get that drain pan thawed, you can pour hot water down the drain tube to make sure that it is clear.  Note: Water may overflow the drain pan at the back of the refrigerator if you pour too much hot water into the drain tube.

 

I hope that this information helps. If you need more assistance, reply with additional details.

 

If you get to the point where you need to have a service technician examine and repair the refrigerator, you can schedule service through this link: Sears Home Services Refrigerator Repair. 

Read More
Lyle W -
Sears Technician
May 13, 2013
See more answers

Top Parts