Model #25369934704 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

My refrigerator is not cold on high setting

A:

I can fully understand your desire to do your own repairs. In this economy I respect it... I found a link, I've provided below, that will give you a good overview that you can study while waiting for an expert response. I hope this helps you and thank you for contacting Manage My Life.

Read More
Henry -
August 18, 2012
A:

Thanks

Read More
Robert -
August 18, 2012
A:

Thank you for your question about your Kenmore refrigerator model 253.69934704. I will be glad to assist you with this question.

If the freezer is working okay, (freezing everything solid in a timely manner) there could be a couple reasons the refrigerator section is not getting cold air. First the control that is located in the freezer compartment is an air control. It regulates the amount of air that leaves the freezer and goes to the refrigerator section. When that control is set at a high setting the air to refrigerator is restricted so cooling is difficult. Recommended setting is mid way or less. (Regardless of this control setting the freezer will freeze). Now if the freezer seems to be slow freezing then the other problem could be that the air flow is restricted by frost on the Freezer coil behind the back panel in the freezer section. This would indicate a defrost problem and components would need replacement. Components in the defrost system are .the defrost timer, defrost thermostat or (bi metal) and the defrost heater element. I will attach the link to our Parts Direct department, just input you model number and you can view and order these parts.

I hope this helps solve your problem, if you need additional help please respond with more details.Sears Parts Direct

Thanks Ron H.

Read More
Ron H -
Sears Technician
August 21, 2012
A:

Thank you..I will put an ice tray in and see if it freezes in a timely fashion and also check the setting is correct. If the ice tray does not freeze quickly should I remove the inside back panel to see if the coils are frosted restricting air flow ? Also if it is then should I just replace all the parts you mentioned or start with a certain order and see if it works?

Read More
Robert -
August 21, 2012
See more answers
Q:

water under the veggie bins.

A:

I know how concerning it can be when your are finding water collecting in your refrigerator. I was able to find a link that includes helpful information while you wait for an expert to respond. I attached the link below. I hope this is helpful.

Read More
Jackie S -
June 15, 2012
A:

Thanks for contacting ManageMyLife.com. The main cause for this issue is that the drain plug is frozen causing the water to pool up beneath the crisper's. That drain hose is foamed into the cabinet. You can unplug the refrigerator and remove the evaporator cover which is the inside back wall of the freezer section (Key 10 in the parts image below). After you remove that cover, you will have access to the drain pan under the evaporator. The normal method for clearing that drain tube is to pour a little bit of hot water down the opening in that evaporator drain pan. This will usually eliminate any clog in that drain tube that you are describing. The second image may also assist you with this.

If you do not feel comfortable repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red Start now button.

Please feel free to let me know if you need further assistance.

Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
June 16, 2012
See more answers

Top Parts