Model #25368234800 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to to disconnect the molex connector in the control housing?

A:

Refer to previous answer: First disconnect power to the unit. Remove the screws holding the housing in place. Now drop the housing down and you will see the connector. It appears to have a tab in the center of the connector. It may press in to unlock and on some, you can insert a small screwdriver under it, to unlock it. The connector will then pull apart. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 26, 2010
Q:

How to to disconnect the molex connector in the control housing?

A:

First disconnect power to the unit. Remove the screws holding the housing in place. Now drop the housing down and you will see the connector. It appears to have a tab in the center of the connector. It may press in to unlock and on some, you can insert a small screwdriver under it, to unlock it. The connector will then pull apart. If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
January 26, 2010

Top Parts