Model #25364722406 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Troubleshooting

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

The freezer is working GREAT!!! but the fridge is not working

A:

Having one side of your appliance working fine and the other side not working can be confusing. While you are waiting on an expert to answer your question, I found a great link that can help you for now. I have attached the link below. Hope this helps!

Read More
Dezeray S -
August 17, 2011
A:

Check the inside back wall of the freezer for excessive frost or ice. This could indicate that you have an automatic defrost system problem. Here is a link for a video that shows some information and troubleshooting for the type of problem that you are describing: Video: Refrigerator Not Cooling Repair . The information in that video may help you.

You can force the defrost to start in your refrigerator by using the procedure in the image below. This may help you check that system. Be sure to exit that forced defrost mode after that test.

You can view and order parts for your refrigerator on the Sears PartsDirect website.

If you need more help, reply with additional details.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
August 18, 2011
See more answers
Q:

what are the vertical wires behind my refridge

A:

Adding more specific details and including a model number will get you a better answer from an expert. if you would like to resubmit your question I would be more than happy to help you. Thank you and have a great day!

Read More
Alina F. -
September 18, 2010
A:

I have a Kenmore model 253.64722406. Some of the vertical wires surrounding the coils in the back have come loose. Did not know if this warranted needing a repair because I didn't know what function they serve. Thanks.

Read More
MushTasha -
September 19, 2010
A:

Thank you for adding the model number. I have checked and it looks like your refrigerator does not have an icemaker but is wired for one. If the wires are lt.blue, black, yellow, and green/yellow they are for an icemaker. You do not have to call for service just use some tap to hold them away from the coils on the back of the refrigerator. duct tap will do just fine.

If the wires are a different color, you might have to reconnect them. Please replay with the wire colors if they are different from what I have listed above.

I hope this is helpful. Thank you for using Manage my life.

Read More
Mark T -
Sears Technician
September 19, 2010
See more answers
Q:

The Kenmore refrigerator lower gasket is loose. The lower edge has some rust appearing. What can I use to glue this? Thank You.

A:

I see you need to glue lower Gasket Refrigerator door back on. While you are waiting on an expert to answer your question. You can visit Sears.com website to search for a glue for your Frig door. I attached the link below. Hope this helps! Good luck.

Read More
Dezeray S -
September 13, 2010
A:

Gluing the gasket on a refrigerator door doesn't work well. You would have to remove the door and clean and dry the area to get glue to stick. I recommend you repair or replace the door gasket instead of using glue.

The door gasket on your refrigerator has a small lip that plugs into a groove in the refrigerator door. If the lip is torn off the gasket you need to replace the door gasket.

If the lip is still on the door gasket you can clean the lip and the groove it plugs into and push the lip of the gasket into the groove with a small flat blade screwdriver.

It will be easier to clean the lip and groove if you remove the door from the refrigerator. You can remove the lower hinge by removing 3 screws and take the door to a flat padded table for cleaning and installing the gasket.

Read More
Jimmy K -
Sears Technician
September 14, 2010
See more answers

Top Parts