Model #25363462302 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore Refrigerator Meat Drawer Rail Removal and Installation

A:

Removing the meat drawer hanger on the Kenmore refrigerator can take some patience. An expert will research this removal method and respond within 24-48 hours. In the mean time I am providing a few links that may be helpful.

Read More
Anna T -
June 29, 2012
A:

Thank you for your question. Replacing some parts can be a little tricky sometimes. I'm listing a link you can click on for a video about removing the meat drawer rail http://www.youtube.com/watch?v=RkBlS54xeIc . This video shows a side by side fridge but removing the rail should be similar to yours. The rail on your model will also have screws and tabs. I hope this will help you.

Read More
Scott D -
Sears Technician
July 03, 2012
A:

P/N 240530601 does not attach with a screw in Model 253.61112103. There are two metal tabs descending from the shelf above. The forward slot on the rail wherein the forward metal tab resides usually breaks off causing the drawer to drop on the left side. The rear attachment point is apparently a stronger design. However, removing the rail at the rear attachment point is not straightforward by any means. Nor is it obvious to me. It is advice on that point that I request.

Read More
James -
March 21, 2014
A:

CORRECTION: P/N 240530601 DOES attach with a screw in Model 253.61112103. The cross-head screw is on the back of the rear of the hanger and can not be seen until the shelf is removed from the refrigerator. Tricky!

Read More
James -
March 21, 2014
See more answers

Top Parts