Model #25360734407 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

ice maker kit install on sears refrig/freezer

A:

I see you have an issue with a part for the refrigerator. I can understand the confusion. The expert will be able to help sort this out but will need the model number of the refrigerator to provide an accurate response. Just add to this same thread.

Read More
Barbara H. -
September 03, 2011
A:

the model # is 253.607734407 the serial # ba71737898.on the refrig tag also says optional ice maker kit #AD-17 sears sent me a IM34

Read More
bill -
September 03, 2011
A:

Thanks for providing that model number. It probably has an extra "7" in it. The model number probably should be 253.60734407. Based on that model number, the ice maker kit should be part number IM-115 instead of IM-34.

The solenoid valve is 120 volts AC for this refrigerator. I provided a wiring diagram for the refrigerator and the ice maker in the image below. This information shows that the solenoid is 120 volts AC. Your details seem to indicate that you already installed the IM-34 ice maker in that refrigerator. The IM-115 ice maker does not vary much from that IM-34 ice maker. That IM-34 ice maker is designed to fit the older refrigerators with the static condenser coils on the back of the refrigerator. If that IM-34 ice maker cannot be installed properly in that model that you have, I recommend that you use the kit IM-115.

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
September 06, 2011
A:

thanks for the help as i was getting no where with cust service.the only issue now is to figure out which im-115 kit to get.the schematic really helped me trace the electrical down the IM_34 unit caused a 24 volt back feed to the solenoid.really appreciate and we will see what happens gonna look up the needed parts tonight,

Read More
bill -
September 07, 2011
A:

I added a direct link for the IM-115 ice maker kit below this response. That kit will probably have many of the same parts that the IM-24 kit has. If you need more help, let us know.

Read More
Lyle W -
Sears Technician
September 08, 2011
See more answers

Top Parts