Model #25358685894 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

ice maker 25358685894

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore refrigerator.

From the information you have provided above, after researching model number 253.58685894. it seems by replacing the water inlet valve it should get the refrigerator back up and working properly. The part number for the valve is 128859701.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 16, 2015
Q:

Kenmore Refrigerator Model No. 25358685894: Defrost not working

A:

Defrost problems can affect everything else in the fridge. Since you made repairs previously and the problem has returned, The expert should be able to point you in the right direction. If you do decide you would prefer an expert technician to diagnose and repair, an option at this point would be to visit Sears Home Services and use the scheduler. Whichever way you go, good luck.

Read More
Barbara H. -
September 04, 2010
A:

Thanks Barbara, but I was looking for a little more insightful information. Your response goes with saying.

Read More
lvpes -
September 04, 2010
A:

If you are only getting 77 volts, the element will not heat. Make sure when you make a voltage check, that the wires are not disconnected. They must still be in place (connected) or you will get a false reading. With the wires connected if you still get 77 volts, make a voltage check from the brown wire on the element to the white wire on the bi-metal. If you get 120 volts now, the bi-metal # 297216600 will need to be replaced. If you still only get 77 volts, the next check will be at the timer. Again, check from the brown to white wires. If you don’t have 120 volts, replace the timer # 215846602. If you do get 120 volts, it will indicate a possible break, in one of the wires in the cabinet. In this case, I recommend having a technician check it, to verify because a broken wire in the cabinet is not repairable. I'm listing a site you can access, to have a tech come out. Here is a link for the website: Sears Home Services .

Read More
Scott D -
Sears Technician
September 07, 2010
See more answers

Top Parts