Model #25354363400 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Ice & Water Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Where do I connect the water actuator to the power board on my kenmore water dispenser?

A:

Where do I connect the water and ice dispenser wires to the power board and the two br wires to the power board?

Read More
Dan -
April 24, 2012
A:

I need the wiring diagram to connect the wires to the power board on the water and ice dispenser

Read More
Dan -
April 24, 2012
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with wiring the actuator for the water dispenser. We are here to help. Unfortunately without the model number of the refrigerator, we cannot provide that information. Please respond back to this thread with the complete model number so we can help you.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red next now button.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
April 25, 2012
A:

Hi John, The model number of the Kenmore refrigerator is 253.54363400

Read More
Dan -
April 25, 2012
A:

Dan I provide you with a wire schematic to help you wire the switches. Just click on the image.

Read More
John H -
Sears Technician
April 26, 2012
A:

Do you have any photographs of where the wires should be connected? The diagram is hard to read.

Read More
Dan -
April 26, 2012
A:

Dan, I finally found some pictures that you requested. These pictures should help you.

Read More
John H -
Sears Technician
May 01, 2012
A:

I have a question... I replaced my water actuator a few months ago. Since then, our fridge has had electrical problems and now I've been told my inverter needs to be replaced. 25344383402 Kenmore Elite Refrigerator The problems have been that the fridge has been going on and off. Powering down then back on again. The alarm will go off intermittently. Two repair people said the inverter may need to be replaced. I want to know if I may have screwed up the wiring somehow during the repair. The water has sputtered a little bit after I repaired it.

Read More
Kendra -
May 21, 2012
A:

Kendra, Most likely you did nothing wrong. The only way you could have cause the problem is, if the refrigerator was not unplug the repair was performed. Even then, the circuit board would have had to touch a piece of metal, or get wet to short it out during the repair. Generally problems in the dispenser are limited to it. The inverter going out most likely normal wear out. Since you was able to do the other repair, changing the inverter is much easier. Just unplug the fridge, remove back cover and install one wire at a time.

Read More
John H -
Sears Technician
May 22, 2012
See more answers

Top Parts