Model #25353672302 KENMORE Side-by-Side Refrigerator

  • Freezer Door
    3 Results
  • Refrigerator Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • Controls
    3 Results
  • System
    3 Results
  • Dispenser
    3 Results
  • Ice Container
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Compressor stops working, I heard click, unplug, keep for one hour, plugin, compressor works again, but in a while, it again stop working... 25353672302 Kenmore Refrigerator

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your refrigerator. Upon researching 25353672302; beside the relay there is a starter and capacitor. When one part on the compressor goes out it is best to replace the other ones as well. If you’re a little handy you could replace it yourself. The parts plug right into the compressor. I linked a diagram below. The starter kit is number 30 the capacitor is number 55.

We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 06, 2014
A:

I didn't find diagram which you linked. Thanks.

Read More
Hai -
October 07, 2014
See more answers
Q:

Does the icemaker drum and blade rotate with the auger? 25353672302 Kenmore Refrigerator

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your fridge and I do understand your frustration. Glad to help out. I'm looking at your model number 25353672302 and here is a video that will help troubleshoot the issue. From your description I suspect that the drum may not be riding on the shaft correctly or may have been damaged. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information. I hope this information helps you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
September 22, 2014
Q:

Kenmore refrigerator damper assembly

A:

Working on your refrigerator can be rather tough. After researching the Manage MY Life website and have located a link similar to issue. While you are waiting for a detailed reply from an expert I have provided the link below. Hope this helps!

Read More
Priscilla V -
August 30, 2012
A:

Thank you for your question. The screw you are referring to is difficult to remove. There is a special tool (nut driver) for removing this screw. It will be very difficult to remove the screw without this tool. This nut driver will come included with a complete control assembly # 5303918283, which is available at http://www.searspartsdirect.com/partsdirect/part-number/5303918283/0046/253?pathTaken=directMatch&filterPart=&pop=flush&prst=0&shdPart=5303918283&sid=MMLxexpertxmerch . Unfortunately, the tool is only available with this control kit. I hope this will help you. If you would like more assistance, reply to this thread and I will assist you further.

Read More
Scott D -
Sears Technician
August 30, 2012
A:

Yikes, I was afraid of that. I ordered the replacement damper assembly, and it came with the control assembly and 1 replacement screw, but no nut driver. I've tried every 1/4" drive 1/4" socket that I have, and it still won't grab the screw head on that one screw. Is it a special nut driver with a couple open sides? I don't see how it would work with that ring all around the screw head. I don't suppose you'd have a photo of the nut driver, would you? Thanks for your help!

Read More
Lester -
August 31, 2012
A:

Lester, unfortunately, there is no picture or part number for the tool. It's only available in the control assembly listed.

Read More
Scott D -
Sears Technician
August 31, 2012
See more answers

Top Parts