Model #25344823600 KENMORE PRO All Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • System
    3 Results
Find part by diagram >

Question and Answers

Q:

Not run ,no control #s visible 25344823600 Kenmore Pro Refrigerator

Q:

Which dual trim kit is better?

A:

I am sorry to hear that you having some installation issue for the unit.The ManageMyLife website is a great place to find answers to questions that need qualified and insightful responses. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner. I provided this installation guide in this link that may help below.

Read More
James -
September 21, 2012
A:

Thank you for your question. I'm attaching the available trim kit information below. I hope this will help you.

Read More
Scott D -
Sears Technician
September 26, 2012
A:

Scott D can you resend the trim kit number again Thank you steve

Read More
Anonymous -
May 15, 2013
A:

The trim kit numbers are (TRIMKITSS1) and (TRIMKITSS2). I hope this will help you.

Read More
Scott D -
Sears Technician
May 16, 2013
See more answers
Q:

Kenmore Pro upright refridgerator model 253.44823600

A:

I understand that your Kenmore pro upright refrigerator is not cooling even though your compressor fan is working. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
February 23, 2013
A:

Thanks for the quick response.On schematic ventilatoor fan is in parallel with compressor and is running.How would I test compressor capacitor and compressor relay?

Read More
Felix -
February 23, 2013
A:

Thank you for your question. I'm sorry you are having a problem with your refrigerator model # 253.44823600. If the condenser fan is running but not the compressor, it could be a problem with the starting device, the capacitor or the compressor itself. It can be difficult to determine, which of these components has failed. Now, if the starting device is burnt or if it rattles when shaken, it will indicate the starting device has failed. If both of these checks seem ok, a technician will have a kit and meter, he can attach to the compressor that will determine if the compressor or starting device has failed. Without this kit and meter, a chance can be taken to replace the starting device # 216954210 and capacitor # 5304464438. If the compressor still won’t run or if it runs but then quits again, it will need to be replaced. I’m listing a site you can access, to have a tech come out. Here is a link for the website:  Sears Home Services. I hope this will help you.

Read More
Scott D -
Sears Technician
February 25, 2013
A:

Is the a way of testing the compressor with a digital multimeter ?It seems to be running,but not cooling!

Read More
Felix -
February 27, 2013
A:

OK compressor is ok.freezing up coil at point of entry to refridgerator ie where defrost thermostat is located.Any ideas?

Read More
Felix -
February 27, 2013
A:

Felix, this indicates a problem in the sealed system. A technician will need to make this type of check. You can call 1-800-469-4663 to schedule a tech to come out.

Read More
Scott D -
Sears Technician
February 28, 2013
See more answers

Top Parts