Model #25331879108 KENMORE Top-Mount Refrigerator

  • Door
    3 Results
  • Cabinet
    3 Results
  • Shelves
    3 Results
  • System
    3 Results
  • Ice Maker
    3 Results
  • Wiring Schematic
    3 Results
  • Wiring Diagram
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


trouble shoot an Kenmore Icemaker


Thanks for contacting manage my life about your refrigerator ice maker in model 253.31879108; sorry you are having a problem. When the bale arm is in the up position the ice maker should be off, because the bale arm is attached to a lever arm that operates a switch inside the ice maker head.    Inside this ice maker head are all the components that operate the ice maker; there are many wires, switches cams motors and other components. If the head is disassembled all these components must be placed back correctly in order for the ice maker to work again.  If you choose to open the ice maker head use caution, observe wiring and component location as you disassemble. (Taking picture at each step is recommended if you choose to perform this task)  the most common failure for the unit not cutting off is actually a broken section of the ice maker head molding and the only fix is to replace the ice maker. This would have to be verified, if the bale arm is very loose at the end that goes into the head then it is most likely the broken mold. Should you decide to open the head and check the switches you will find a wiring diagram on the inside if the head cover. If you choose to replace the ice maker here is a link to a new ice maker parts number 5304458371.If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
September 24, 2013

Top Parts