Model #25328042800 KENMORE Upright Freezer

  • Door
    3 Results
  • Cabinet
    3 Results
  • System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do I fix the light in my freezer that has gone out and the replacement bulb did not work?

A:

The wiring diagram and a parts drawing of your freezer are shown in the image below. The light should turn on any time that the door is open. The switch is located on the bottom right side. It is Key 14 in the parts image below. If you unplug the freezer, you can pull the switch out and check it. With the switch in the extended position (not pushed in) you should measure continuity (near zero ohms of resistance) across the leads on the switch. You could also test the circuit by taping the ends of the wires together with electrical tape to bypass the switch and then plugging the freezer back in. If the light turns on with the switch bypassed then replacing the switch will fix your problem. If the light will not turn on with the switch bypassed then you have a failed socket or a break in the wiring through the light circuit. Unplug the freezer and properly reinstall the switch following this test.

You can order parts from the Sears PartsDirect website.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
February 03, 2010
Q:

Where can I find installation instructions and circuit breaker requirements for Kenmore freezer model 28042?

A:

The full model number of your Kenmore freezer should be either 25328042800 or 25328042801. Both of these models have the same Use & Care Guide. This guide provides the installation instructions and electrical circuit requirements. This guide is available on our Manage My Home website. Here is a link for this manual: Use & Care Guide

Read More
Lyle W -
Sears Technician

Top Parts