Model #25326482100 KENMORE ELITE Upright Freezer

  • Door
    3 Results
  • Cabinet
    3 Results
  • System
    3 Results
Find part by diagram >

Question and Answers

Q:

How do i install shelf. Shelf is hard metal and am having trouble bending shelf to fit into holes in the Freezer side 25326482100 Kenmore Elite Freezer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your freezer. Upon researching model 25326482100; you would have the shelf at a slant. Install one side first then push the other side down till it lock in the holes. If you have it slanted down then you would push up. Make sure to push more on the frame and not the glass and push up or down evenly on the front and back.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 26, 2014
Q:

Kenmore Freezer 253.26482100 Running Constantly But No Display

A:

I'm sorry about the difficulties your having with your freezer. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day!

Read More
Yadira B -
September 03, 2012
A:

Thank you for your question. Based on the information listed this does lead to a defective main control module # 216979700. The control board in the door is, for the display and setting the temperature. The module controls all the functions of the unit and the display board. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
September 05, 2012
A:

Thank for the reply. It took me a couple of weeks before I worked the stored food in the freezer to a small amount. I just changed out the main control module and nothing changed. The control display is still blank and the freezer is still running nearly continuously. Any ideas? If I need to replace the Electronic Control Board #216979600 in the door display what needs to come apart to reach it?

Read More
Allen -
September 29, 2012
A:

Allen, if the screen is still blank, it could be a defective display board # 216979600 or a loose wire connection. To access this board, the overlay # 216947501 will need to be peeled off. The overlay will usually be damaged when peeling it off and it will need to be replaced. With the overlay off, you will be able to access the display board. Now, this board will not have a bearing on the run time of the unit. It�s not unusual for this unit to run for long periods of time. If the temperature is maintaining a temperature of 0 to 5 degrees, it's ok. If the temperature is getting excessively cold below 0 and the board has been replaced, first adjust it to a warmer setting. If it still gets too cold, it would lead to a defective sensor # 297018400. I hope this will help you.

Read More
Scott D -
Sears Technician
October 01, 2012
See more answers
Q:

Where is the battery on my Freezer?

A:

The Freezer is one of the most important appliances in the home and by far a must need. So I am understanding your concern over the issue that is currently happening. I have researched your issue on this website and came across a question that is similar to yours. The expert provides further detailed information that might enlighten you.

Read More
Priscilla V -
September 29, 2011
A:

Thanks for contacting ManageMyLife.com. I'm happy to help with your freezer battery question. The battery is located at the bottom right corner of the toe grille. Please view part #103 below in the image for a better visual of this location.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. You may visit SearsHomeServices.com and click on the red Start now button.

I hope this helps! Thank you for using ManageMyLife.com.

Read More
Jonathan B -
Sears Technician
October 01, 2011
A:

Big thanks to Pvalde2 & my main man Jon B. your right on key I looked it over and it's exzcatly where you stated & I had that side in a corner and pulled out the oppsite side My DumB move. your help was 100% thanks guys and have a great remainder of the Year !! Thanks !!

Read More
Bertrand Mullins -
January 07, 2012
See more answers

Top Parts