Model #25323425100 KENMORE Upright Freezer

  • Door
    3 Results
  • Cabinet
    3 Results
  • Freezer
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

replace door gasket in freezer

A:

I understand your time is valuable and that is enough for managemylife.com to know and try to help you with the installation of the gasket on the Kenmore freezer before time runs out. I hope the link provided below helps you.

Read More
Anna T -
November 09, 2012
A:

I just had a similar problem as well with my LG freezer door. Since Kenmore makes Lg I was able to pull the gasket out fairly easy and push the new gasket right into place. Just push the groove of the gasket into the freezer door you should feel it push into place. I made sure to start in the middle since the corners can tear. Hope this helps!

Read More
casey445 -
November 09, 2012
A:

This is not the easy push the gasket into a channel type replacement. The recommended procedure would be to take the door off, unscrew all the screws that hold the door liner in place, replace the gasket, re-attach the door liner, re-install the door.

Read More
Chat in RI -
November 09, 2012
A:

Thanks for the question about replacing the door gasket, I will be happy to assist.
The door gasket is held in place by screws that are hidden under the inner flap of the gasket. They are holding the door liner and gasket to the door frame. When replacing this gasket I recommend removing the door from the cabinet, (remove top hinge, and door lifts off bottom hinge. I hope this helps, should you need additional assistance reply with details and I will be happy to respond.

Thanks Ron H. .

Read More
Ron H -
Sears Technician
November 10, 2012
A:

thanks Guys! REALLY appreciate your input....Ron is right, I checked our old upright kenmore freezer and it does have screws holding the gasket in place. Unfortunately I went ahead & bought a new one and will be donating the old one to habitat for humanity since it still works and the gasket is the only problem. Thanks to you all for the advice. I'll pass it on to Habitat so they can replace the gasket

Read More
Lelia -
November 11, 2012
A:

Hello Lelia; thanks for your reply, glad to hear someone will be able to benefit from the old fella! Ron H.

Read More
Ron H -
Sears Technician
November 11, 2012
See more answers
Q:

Why is my compressor staying so hot on my upright freezer?

A:

I know how important it is to have a good working refrigerator in the home so that you can keep your food nice and fresh. While you are waiting for your expert answer, I did manage to find a link that will provide you with some good information to help you with your question. I hope my link is useful.

Read More
Joseph P. -
June 29, 2011
A:

What causes the thermal protectors to trip can it be a faulty protector or is something causing my freezer to get to hot?

Read More
Stephen -
June 29, 2011
A:

I can understand your concern. You have received some good general information from Joseph. This model does not have a condenser fan motor and if the unit is in an area that gets warm or if it's in an enclosed area, the compressor can get hot and quit running. There is an add on fan kit # 5304411775 that will help correct this type of problem. It's available at SearsPartsDirect . I hope this will help you. If you would like more assistance, any additional details will be helpful and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
June 30, 2011
A:

This freezer is in the same place it has been for the last 5 years. I have never had this problem before and it is no hotter this year than before. It is in my shop which is not air conditioned but the walls and ceiling have insulation, four windows stay open all the time. I'm not saying rhis isn't the problem could the age 5 years old make it heat up more that normal?

Read More
Stephen -
June 30, 2011
A:

It's difficult to say without actually seeing the situation. I know it may seem strange now after all this time but by placing the box fan there, so air flows across the compressor and it started cooling again, does indicate a lack of air flow or that the area may be warmer than before. The fan motor listed will help correct this type of problem. If you would like more assistance, please let me know and I will be glad to assist you further. Thank you for using Manage My Life.

Read More
Scott D -
Sears Technician
July 02, 2011
A:

This fan you are recomending does it run all the time or is it wired in to go off when the compressor goes off? If so is this something I can do or will I need a repairman to install? Also, do you think the compressor getting that hot my not last very long? If so is there a freezer model that comes with a fan that will work in an area ortside in my shop better?

Read More
Stephen -
July 02, 2011
A:

This fan will cycle on and off with the compressor. It's not difficult to install and will come with instructions. The compressor should not be affected unless this problem lasted for several days. There is really no way to make this type of determination, as long as the compressor is working. All of the freezers I checked do not have a condenser fan already installed. I recommend checking with the local retail store, to see if the features include a condenser fan motor.

Read More
Scott D -
Sears Technician
July 02, 2011
See more answers
Q:

kenmore model 25323425100 cubic feet?

A:

Knowing specific information on an appliance of your own be very helpful. I have found a link where you can figure out how to know the cubic feet on your specific appliance. I hope that it is helpful while you wait for the expert to answer.

Read More
celene -
March 31, 2011
A:

Thank you for your question.

I have looked up the model number submitted. The freezer is a 14 cubic foot model manufactured in 2003.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 01, 2011
See more answers

Top Parts