Model #25150501010 KENMORE Dehumidifier

  • Dehumidifier
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dehumidifier won't turn on 25150501010 Kenmore Dehumidifier

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your dehumidifier is not working.

 
Back Cover Disassemble

1) Remove two Side Cap on the side part by awl. 
2) Remove two Screws. 
3) Remove Five Screws on the Back Cover. 
4) Separate Back Cover by pulling the lower part. 


Front Panel Disassemble
1) Remove two Screws on the Front Panel. 
2) Remove two Screws on the side PCB Case, then disassemble PCB Case Cover. 
3) Separate two Display PCB connectors on the Main PCB. 
4) After removal Screw, separate by pulling back of the lower Front Panel part. 


Display PCB & Humidity Sensor Disassemble
1) Remove one Screw of Humidity Sensor on the back of Front Panel, then separate Sensor Connect .
2) Remove two Hooks on the back of Front Panel, then separate Top Cover by spin over.  
3) Remove five Screws on the Display PCB.

Main PCB, Comp. Capacitor & PCB Case Low Disassemble
1) Disconnect all connectors on the Main PCB, then remove two Screws on the Main PCB. 
2) Separate Main PCB, then remove the Screw of Clip Capacitor which make fixing 
of Comp. Capacitor. 
3) Disconnect all the connectors on the separated Comp. Capacitor.
4) Remove two Screws of PCB Case Lower cover on the Top Part. 

Is AC12V measured at Transformer
Output? NO- Faulty transformer, replace transformer.
 
Is DC5V measured at Capacitor (C3) on the MAIN PCB?
YES- Replace Display PCB
NO- Faulty MAIN PCB, replace MAIN PCB

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 28, 2015
Q:

Kenmore dehumidifier does not turn on 50501

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

 I do apologize in order to get you any information we will need the complete model number off of the dehumidifier itself. 

Once we have that model number we can give you repair information. Please resubmit your question with the model number. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 


Read More
Natasha12 -
Sears Technician
July 13, 2015
A:

The model number is 251.50501010

Read More
Charles -
July 15, 2015
A:

Hello, I'm hoping someone can get back to me to answer my question. I've listed the model number above as requested. Thank you.

Read More
Charles -
July 22, 2015
See more answers
Q:

Dehumidifier #25150501010 will not cycle off 25150501010 Kenmore Dehumidifier

A:

Thank you for your inquiry on your Kenmore Dehumidifier, Model: 251.50501010. From reviewing the details on your model, first, it will need to be determined how accurate the other device is. Also, is this unit sized properly for the area it's being used for? If both of these checks are ok, it should be cycling around the set point. This would lead to a sensor assembly problem. A technician would be needed to make this check. If you would like to have a technician check this.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dehumidifier to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
June 03, 2015

Top Parts