Model #247889330 CRAFTSMAN Walk Behind Lawnmower, Gas

Find part by diagram >

Question and Answers

Q:

How do I tighten the tension pulley that engages the blades? 247889330 Craftsman 33-in. wide cut mower

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

starter spring 247889330 Craftsman 33-in. wide cut mower

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is part information needed for the engine of the lawn mower.
 
Glad to help out.   Im  looking at your Craftsman Lawn mower model number 247889330.

I see you are looking for information on putting the springs and the pull cord back so you can get the starter running.    I have it on the link here -> Getting the starter together

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
April 24, 2014
Q:

cable for 33-inch craftman mower model 247889330 Craftsman 33-in. wide cut mower

A:

Thank you for your question and I understand your concern. 

I'm sorry but we do not have model specific step by step instructions for the procedure of replacing the cables. I believe if you take a look and follow the cables you should be able to disconnect each end and replace the cables. You will have to remove the belt cover and the instructions are on page 16 in the Operator's Manual.


Once you take the belt cover off, you should be able to access and replace the cables. I hope this helpful. I you do not feel confident in replacing the cables, I recommend taking the mower in for repair or call and have a service technician come out and replace the cables.




Read More
Joey S -
Sears Technician
April 14, 2014

Top Parts