Model #247887040 CRAFTSMAN Snowthrower, Gas

  • Shroud/lower Chute/handle
    3 Results
  • Auger/housing
    3 Results
  • Engine - Zs161-jwa
    3 Results
  • Decals
    3 Results
Find part by diagram >

Question and Answers

Q:

Replace primer on 88704 snowblower 247887040 Craftsman Snow thrower

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your snowthrower and do understand your frustration. Glad to help out. Im looking at your model number 247887040 and the part number for the primer bulb is 951-10639A and the bulb sits on the control panel and will have a hose on the back side of it and will need to be removed form the old bulb. The bulb has 2 tabs on the back that will need to be pressed for the bulb to come out of it place. 
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page.
 
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Sherman_G_Wallace -
Sears Technician
February 18, 2014
Q:

How do I reattach the starter coil rope on my snow thrower model number 247.887040?

A:

I am including an illustrated set of instructions that should help you through the process of replacing the recoil starter rope (see images below).

If you require further assistance please resubmit your question with more details. I will be looking forward to helping you again in the near future.

Read More
Landell -
Sears Technician
March 01, 2010
A:

i had taken of the srew on the starter coil to get the piece off to put the new rope back on and when i did that the coil spring inside the piece unwound and i can not get it back in to put the pice back together and the srew back on i tried to get it back together thought i had it fixed i put it back to gether with new rope too and when i pull the cord it is not working any suggestions or pictures to see if i am putting it back together right ?

Read More
donald -
November 13, 2013
See more answers
Q:

How much oil do I put in my Craftsman 123cc snowblower?

A:

According to the owners manual, the oil capacity for your snow thrower is 20 ounces.

It is best to fill the engine to the full mark on the dip stick. If the snowthrower is new, there will be some residual oil in the crankcase from the test start at the engine factory. Twenty ounces will overfill the engine.

Read More
Jimmy K -
Sears Technician
December 08, 2009

Top Parts