Model #247886700 CRAFTSMAN Snowthrower, Gas

  • Handle
    3 Results
  • Auger/housing
    3 Results
  • Drive Mechanism
    3 Results
Find part by diagram >

Question and Answers

Q:

Craftsman Sears craftsman 26" snow throwermodel #247886700 247886700 Craftsman Sears craftsman 26" snow thrower

A:

Thank you for contacting SearsPartsDirect.com with your question about your Craftsman Snow Thrower model 247886700. I will be happy to help you with the lubricant for the gear box. I have included the link below for you to view the owner's manual online in case you don't have a copy.
 
 
Page 24 of the manual is the transmission repair parts diagram. At the bottom of the page the manufacturer lists Benalene Grease as the gear box lubricant. The grease comes in a 10 oz. tube, but the gear box will need 12 oz. Be sure to order at least two tubes. I have included the link below to order the grease. 
 
 
I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
July 12, 2014
A:

is the grease the same for the pinion gear and beveld gear in the auger gear box

Read More
matthew -
July 13, 2014
See more answers
Q:

drive cable replacement 247886700 Craftsman Sears craftsman 26" snow thrower

A:

Getting the correct replacement cable for the Craftsman snow thrower is what managemylife.com can research when the original part is no longer available. It may take two business days, usually sooner to get an answer. Thanks for your patience.

Read More
Anna T -
February 15, 2013
A:

Thanks for posting your question on ManageMyLife.com

I do apologize that the auger cable is no longer available. According to my information the manufacturer has not a approved a substitution part.  What I suggest is to put the part numbers into a Search Engine and see if someone has a generic version of the part or someone else still may have the original in stock.

Read More
Desirea -
Sears Technician
February 16, 2013
See more answers
Q:

How difficult is it to replace the primer line on my Sears snowblower? 247.886700

A:

I found some information for you that I am really hoping will help you. I am adding the link below to help you with your question while you wait for your expert response. It may take 24-48 hours. I do hope that this will help you with the snow blower.

Read More
Marc -
December 02, 2012
A: