Model #247885680 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Wheel Assembly
    3 Results
  • Tine Assembly
    3 Results
  • Drive Assembly
    3 Results
  • Drive Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

i need a switch for my snow blower starter 247885680 Craftsman Snow thrower

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman snow thrower.

From the information you have provided above, I have located the part number for the starter switch for your snow thrower. The part number is 35454.this can be ordered at searspartsdirect.com.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
January 17, 2015
Q:

manuals

A:

Having the correct Owner's Manual is nice to have. Managemylife.com is always a great resource to find the answers to just about anything. I know this information can be very helpful for you to have. While you have been waiting for your expert to respond, I did some research but I was unable to locate information that would be helpful with regards to your question at this time. Your expert will be answering you within two business days but usually sooner. Thank you for using Manage My Life.

Read More
James -
November 26, 2011
A:

I'm afraid we do not have a copy of this manual available any longer. With the age of the machine much of those materials were disposed of years back. At this point the only things we do still have are the parts images. You can go HERE with the model number to view the parts images for your machine.

If you have any specific questions or problems with the snow blower please let me know.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
November 29, 2011
See more answers
Q:

the track came off the left side of my snow thrower (Model# 247.885680). how do I put it back on?

A:

Accidents like these always just happen without us even knowing exactly how to fix it. So I have taken some time to research your question and came across this great lilnk that can help you out with your problem. I have attached the link below. Hope this helps!

Read More
Alina F. -
October 15, 2010
A:

Thank you for your question.

I am sorry you are having a problem with your snow thrower. If the track was loose enough to come off, I suspect the adjusting lock nut has come off. I have provided you with an image below showing the adjustment on the track. First, look for the adjusting nut. It is key number 17 in the image. There should be one on each side. If the nut is missing, you can purchase it from a local hardware store. The nut is a 5/16 x 18 lock nut.

To install the new belt loosen both side adjustment nuts. Then turn the front idler wheel (it is key number 2) to make sure it is not stuck. If does not turn it will cause the track to come off. Spray the wheel and the axle with WD-40 and work it loose. After the wheel moves freely, place the track back on the wheels. You will have to walk the track back into poison. There have been a few I had to remove the wheels to install the track. You need to place the wheels into the track then slide the wheels and track back onto the axles at the same time.

After the track is on you have to tighten the adjusting lock nuts. Tighten the nuts equally until the slack is out of the track. You do not need the track to be as tight as a banjo string. Only tight enough it can not jump off the drive wheels.

I hope this is helpful.

Thank you for using Manage my life.

Mark T. Please click on the following link to order the parts you need. Sears Parts Direct

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
October 17, 2010
See more answers

Top Parts