Model #247885570 CRAFTSMAN Snowthrower, Gas

  • Handle Assembly
    3 Results
  • Main Frame
    3 Results
  • Wheel Assembly
    3 Results
  • Tine Assembly
    3 Results
  • Housing Assembly
    3 Results
  • Drive Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Trouble Starting 247885570 Craftsman Snowthrower*

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Model247885570 Part # 984-0042C Can you replace the rubber wheel only on the friction wheel? 247885570 Craftsman Snowthrower*

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 
The friction wheel assembly, part number 984-0042C is only offered as a complete assembly, and the rubber is not being offered singly. That is the case for the majority of snow throwers, usually the rubber and the wheel are sold as one part, however, ultimately it's up to the manufacturer on how they distribute the parts.
Sorry for the inconvenience. For convenience, I have included a blue link below that you may click on to be directed to the PartsDirect page to view and purchase the needed part.

Friction Wheel Assembly for Model 247885570

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
February 22, 2014
Q:

Hard to start Craftsman Snow Thrower

A:

Not having a tractor in working condition can be very disappointing, Looking into Manage My Life.com I came upon some information that can be very helpful. I have attached the link below. Hope it helps!

Read More
Maira -
January 30, 2012
A:

With a new carburetor on the engine I can't figure where there is a fueling problem (assuming good fresh fuel).

Perhaps a weak spark is causing this to happen. Take the spark plug out of the engine and then plug it back into the lead. Use insulated pliers to hold the threaded part of the plug against the block/head. Try to start the engine and watch the tip of the plug. You should see good blue spark when you do. If the spark is not blue or is faint then the spark plug and/or coil is failing.

If the spark looks good then there may be a problem with compression. Essentially the rings could be worn out and the lack of compression is what the problem is.

Let me know what you find.

Thank you for using Manage My Life!

Read More
XX Wade_ -
Sears Technician
January 31, 2012
A:

Thanks Wade, I'll try the plug test your way. I kind of just laid the plug (in the boot) on the engine and tried to crank it. I saw more of a whiteish spark. I'll try it your way tonight. Thanks for the tip.

Read More
al -
January 31, 2012
See more answers

Top Parts