Model #247770110 CRAFTSMAN Lawn Vacuum

  • Housing/impeller
    3 Results
  • Handle/bag/chute-blower
    3 Results
Find part by diagram >

Question and Answers

Q:

Diagram of Carberuretor Linkage 247770110 Craftsman Yard vacuum

A:

Thank you for your inquiry on your Craftsman Yard Vacuum, Model: 247.770110. From reviewing the details on your model, it appears that the diagram for the carburetor should be located with the engines model number. On our system the engine model number does not pull up. if you could provide us with the direct model number of the engine, we should be able to retrieve the diagram for the carburetor. 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 16, 2015
A:

24B-031E099 143014500

Read More
Jason -
October 28, 2015
See more answers
Q:

Bag toggle 247770110 Craftsman Yard vacuum

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your lawn vacuum. Upon researching model 247770110; the parts for the bag are sold as an assembly with the bag. I have posted a link that you can use to order the bag assembly. To view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears

Read More
CarlosZ -
Sears Technician
July 29, 2015
Q:

I have a 4.5 hp yard vac 247.770110 I need the part numbers for the rod on the trottle of the carb one has a spring, also need to know where they go. thanks fo

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Alina F. -
November 03, 2011
A:

Thank you for your question.

I will be happy to assist you. i do not want to confuse you with listing all of the part numbers for the linkage. Therefore, I posted an image below that has the linkage parts marked in red. Once you know what parts you need, scroll further down and write down the part numbers. Then click here to order the parts.

I have posted a second image below that shows the linkage connected. Just click on the image to enlarge it.

I hope this is helpful. Please let me know if you need further assistance.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
November 04, 2011
A:

I have the same yard vacuum. I have a question though. I got it used and it started right up for me about 3 months ago. I went to start it up this weekend and it wouldn't start. Changed the spark plugs and nothing. I did notice that the governor spring was stretched out. BUT..I thought I was missing a carberator link so I made a make-shift one that attached to the throttle control and the far right carburetor. When I placed the throttle control into the "start" postion this then moved the right carburetor control as well allowing me to start the engine. It ran well just wasn't able to run it wide open. So why is it doing this? do I need a new extension spring? is the carburetor dirty? Need help. Thanks.

Read More
Andrew -
October 08, 2012
A:

Andrew,

The images above will show you how the linkage should be connected. Once you have yours matching the image above try to start the engine. If it will not start, try putting your hand over the opening of the carburetor and pull the rope. This will choke the engine. If the engine starts and dies when you remove your hand, I recommend cleaning the carburetor. I posted a link below that will take you to a video on how to clean the carburetor. Be sure to clean the small holes in the main jet. This is where the problem usually is.

I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage My Life! Mark T.

Read More
Mark T -
Sears Technician
October 09, 2012
A:

I have this same yard vac and just joined the conversation to see if it would help me with the carb/governor linkage but it seems the images aren't on here anymore...can you please re-post them...or is it just me that I can't see them?

Read More
Clay -
March 15, 2013
A:

Clay, I will be happy to assist you with this. For some reason our old images do not show up in full size. I have reposted the image that shows how the linkage connects on different engines. Please click on the image and find the setup that looks closest to yours. I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
March 17, 2013
A:

I still can't see the images?

Read More
Clay -
March 18, 2013
A:

can you try emailing them to me at cemethe@gmail.com

Read More
Clay -
March 18, 2013
A:

Clay, I am sorry the images did not post. I emailed them to the address you posted. Please let me know if you need further assistance. Thank you for using Manage my life. Mark

Read More
Mark T -
Sears Technician
March 19, 2013
A:

Can you email the images you sent Clay. I need to see how to put the linkage back correctly. You can send to dsyoung7129@verizon.net

Read More
Daniel -
April 13, 2015
See more answers

Top Parts