Model #24738911 CRAFTSMAN Walk Behind Lawnmower, Gas

  • Lawn Mower
    3 Results
Find part by diagram >

Question and Answers

Q:

how does one install a new front axle assembly? 24738911 Craftsman Lawn mower

A:

Burdette,

  I have found a video on youtube.com that shows you step by step how you install that new axle.

Thanks
GClem 9680

Read More
Gary9465 -
Sears Technician
November 12, 2015
Q:

How do I get the blade off?? 24738911 Craftsman Lawn mower

A:

Thank You for choosing Sears PartsDirect.com. Glad to help out. Im looking at your model number 24738911 
loosen counterclock wise and tighten clockwise. The blade bolt has a torque specification of 450 in lbs min. 600 in lbs max. I hope this information helps and  If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com. 

Read More
Sherman_G_Wallace -
Sears Technician
July 10, 2014
Q:

Front Height Adjustment

A:

Push lawn mowers should be simple and easy to fix, but problems like this are not always simple or easy. While you wait for the expert response, I did attach a similar post that may help. I also added the parts diagrams and parts list if needed. I hope these links help.

Read More
Barbara H. -
June 10, 2012
A:

Hello Kendall,

I'm sorry that the height adjustment lever is not holding the position that you set it in. I have included a diagram of the lever with notes on the adjustment, but from your description, I believe that you have the procedure correct already.

The arm, which is permanently attached to the axle assembly #41, is tempered to retain it's shape. If you are unable to get it to hold position after attempting to re-bend it, I would advise replacing the axle assembly. One thing you mentioned is that the mower is two years old. Your mower came with a two year warranty. I would advise that if it is within the two years that you visit Sears Home Services to find the closest Sears store to carry in your mower if it is in warranty.

Here is a link to the axle assembly if you need it.

I hope that I have helped you out with your question, please don't hesitate to reply if you would like any further assistance.

Jerry C

Read More
Jerry C -
Sears Technician
June 13, 2012
A:

I have a 2014 Craftsman 21" push mower. The front height adjustment lever broke in half while mowing. I was going to replace it but how?

Read More
Tim -
June 26, 2014
A:

I have a 2014 Craftsman 21" push mower. The front height adjustment lever broke in half while mowing. I was going to replace it but how?

Read More
Tim -
June 26, 2014
See more answers

Top Parts