Model #2409 YORX Misc Audio

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

Trouble Shooting LFBD2409LM0B Frigidaire Dishwasher

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dishwasher. Upon researching model LFBD2409LM0B; it sounds like the control board may need to be replaced. The control board governs the cycles of the dishwasher so when it fails it can cause the unit to stop and not drain. I have posted a link of the control board to view the link click here.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
April 08, 2015
Q:

Frigidaire dishwasher model # FFBD2409LS0B load noise when running could this be the circulating pump motor or something else? FFBD2409LS0B Frigidaire Dishwasher

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Frigidaire Dishwasher.

From the information you have provided above, I can see how frustrating it can be to have your dishwasher malfunction, but after researching the model number FFBD2409LS0B. I would suggest replacing the pump motor. The pumps tend to make a loud noise when they’re going bad or if a piece of debris is caught in them. Before replacing I would suggest checking for anything stuck in the motor pump. If not then proceed in replacing the motor pump.

If you do not feel comfortable doing this. You can set up a service call at www.searshomeservices.com.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
February 27, 2015
Q:

Dishwasher stuck in Cycle FFBD2409LB0B Frigidaire Dishwasher

A:

Thank you for choosing SearsPartsDirect.com. I will be more than happy to assist you. I can understand any frustration you may have experienced with regards to your unit. Let’s see what we can do for you.

If it’s not switching to the different cycles it should be the control board. Another this is it could be the overlay as well. The control board would be my suggestion to replace first.

Hope this information has helped you. If you are not comfortable doing this repair you can click here to schedule a technician or call toll free 1-800-469-4663. Again, thank you for choosing SearsPartsDirect.com.

 

Read More
JeffwallaceIII -
Sears Technician
December 24, 2014