Model #23358179600 KENMORE ELITE Range Hood

  • Range Hood
    3 Results
Find part by diagram >

Question and Answers


what causes the lights to stay stuck on on my kenmore elite range hood. Model number 233.58179600. Board appears in tact but button does not shut them off.


It can be very aggravating when lights stay on constantly on your range hood. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
August 30, 2012

Thank you for your question and I understand your concern.

The control module/board controls the lights and I would suspect the relay on the control board is stuck or welded shut. You will likely have to replace the control board to resolve the problem. There are no test procedures other than to check voltage out of the control. Based on the symptom, I suspect the control board is faulty.

You can look up and order the control module from Sears PartsDirect.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
August 31, 2012
See more answers

Top Parts