Model #23355213000 KENMORE Range Hood

  • Range Hood
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore Elite Model # 2335213000 over the stove exhaust fan is not working. No lights or fan will work.

A:

Thank you for your question. I am sorry your exhaust fan is not working. The number provided does not appear to be a valid model number. I am unable to access information with that number.  If there is a wiring diagram in the fan and you are comfortable making checks, the information in this post may help trace the problem. It is a similar exhaust.  If further assistance is needed, please reply.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
October 05, 2013
Q:

Kenmore Elite Range Hood #233.55213000 (performance ring)

A:

I'm sorry that you are having some difficulties with your vent installation. I did some research for you at managemylife.com and found an expert answer to a similar question that may assist you until your expert can respond. I have attached the link below. I hope this is helpful.

Read More
James -
February 09, 2011
A:

The installation of the performance ring is described on page 9 of the Use & Care/Installation Manual. Here is a link for that manual in case you need it: Use & Care/Installation Manual . You will need to unplug the range hood or shut off the circuit breaker and pull it down to check the motor and see if this component is in place. A picture of the performance ring is shown in the link provided by James R. in the above response. Follow the instructions in that manual to properly vent the range hood to the outside of your home.

If you need more help, reply with additional details and we will assist you further.

Read More
Lyle W -
Sears Technician
February 10, 2011
See more answers

Top Parts