Model #23352545590 KENMORE Range Hood

  • Hood Assy
    3 Results
Find part by diagram >

Question and Answers


Can I run this vent hood ductless? 23352545590 Kenmore Range hood


Why are my Kenmore range hood model 23352545590 lights not working?


First you will need to determine if the lights are good. This model uses up to 75 watt light bulbs. If you have a lamp or an ohm meter you can test the bulb.

If the bulb work in a different appliance or if it reads higher than 0 on the ohm meter we can rule out a bad bulb.

The next thing you would want to do is disconnect power to the range hood. You can do this by shutting off the breaker to that area of the house.

  1. With the breaker off and the bulbs removed look at the socket where the bulbs sit. You will see a metal piece that makes contact with the bulbs and provides the electric supply. Over time that metal piece can be pushed too far up to make a full contact.
  2. With needle nose pliers gently pull the metal piece down a very small amount.
  3. Turn the breaker back on and re install the light bulb. If the light bulb works turn the breaker back off and repeat steps 1 - 3 for the other bulb sockets.

If the light bulbs still do not work you may be experiencing an electrical failure with the sockets. I would recommend a service technician at that point. You can set up an appointment by going to or by calling 1-800-424-2047.

Read More
Alyse C. - Personal Solutions Manager -
Sears Technician
January 28, 2010

Top Parts