Model #23352540590 KENMORE Range Hood

  • Hood Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

i HAVE A KENMORE RANGE HOOD MODEL # 23352540590 i AM TRYING TO REPLACE THE FAN SWITCH UNIT. i HAVE THE PART BUT DONT KNOW HOW TO GET THE FRONT PLASTIC COVER OFF

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
aashe -
October 14, 2011
A:

Shut off the house circuit breaker to disconnect the electrical power for the range hood. Remove the wiring box cover. Remove the name plate by pushing out on the nameplate locking tab from inside the hood while pushing the nameplate to the left. The round locking tab is located on the right side of the hood about 6 1/2" in.

These instructions should help you remove that cover. If you need more assistance, let us know.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
October 17, 2011
See more answers

Top Parts