Model #23351423200 KENMORE Range Hood

  • Range Hood
    3 Results
Find part by diagram >

Question and Answers

Q:

fan switch

A:

Thank you for your question. I'm attaching the wiring diagram below for this range hood. To connect the wires to the fan switch, the black wire from the light switch and the heat lamp switch will connect to the common terminal 1. The black wire from the speed control will connect to terminal 2 and the white wire will connect to terminal 3. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
September 24, 2013
Q:

fan switch

A:

Thank you for your question. I'm attaching the wiring diagram below for this range hood. The black wire from the light switch and the heat lamp switch will connect to the common terminal. The black wire from the speed control will connect to terminal 2 and the white wire will connect to terminal 3. I hope this will help you. If you would like more assistance, reply to this thread and I will be glad to assist you further.

Read More
Scott D -
Sears Technician
September 24, 2013
Q:

Need help getting a blower installed into a 42" Kenmore Elite hood range

A:

I can understand your concern over wanting to know how to properly replace the motor to your range hood. While you are waiting for your expert answer, I did some research on the unit. At this time, I was unable to locate information that would be helpful in regards to your question. Some of these questions that are asked will need specific research and will be answered by an expert with-in two business days but usually sooner.

Read More
Julio -
November 15, 2012
A:

Your details indicate that you are attempting to install an internal blower motor. That motor model number that you provided (97015476) is part of a blower/rough-in kit. That kit has the mounting bracket that your description seems to indicate that you are missing.

Here is a link for the installation guide on the range hood: Kenmore Elite 42" Range Hood Installation Guide .

Here is a link for the installation guide for the blower/rough-in kit that matches that blower motor 97015476: Range Hood Blower Installation Guide .

I hope that this information helps. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
November 19, 2012
See more answers