Model #23351063600 KENMORE PRO Range Hood

  • Cabinet Parts 1
    3 Results
  • Cabinet Parts 2
    3 Results
Find part by diagram >

Question and Answers

Q:

Does the wiring kit include the jumper cable from the control to the control pcb or can they be purchased separately 23351063600 Kenmore Pro Range hood

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Kenmore Pro Range Hood 233.51063600 blower speed and hum

A:

It can be difficult to try an figure out if your new range hood is working properly. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days. I also added the link below to Sears Home Services, if you decide to schedule service under the warranty. Thank you for using Manage My Life.

Read More
Yadira B -
January 15, 2013
A:

The blower only starts on the high speed momentarily. That issue is mentioned in the manual but it is not really noticeable when the blower starts on the low speed. It does not start at high speed and stay there for several seconds then slow down. It just starts quickly and speeds up then settles on to the low setting. If the fan starts and runs properly on the various settings then it is probably working normally.

The noise that you are describing could be caused by an installation problem. If you had the range hood installed by a contractor then I recommend that you contact the service provider about the noise. The contractor can examine the installation and try to determine the cause of that noise. If you installed the range hood yourself, I recommend that you check the fasteners and all aspects of the installation to make sure that the range hood is installed correctly.

If you are certain that the range hood is not working properly and you need to have it serviced under the warranty, you can call Sears at 1-800-469-4663 (1-800-4MY-HOME) to set up service.

If you need more help, let us know.

Read More
Lyle W -
Sears Technician
January 16, 2013
See more answers
Q:

I have a Kenmore Pro gas range, backslpash and a range hood, how do they all install and mount together? Cant find a install manual for the backsplash?

A:

I understand how it can be quite challenging when it comes to installing parts on an appliance. Managemylife.com is a great place to find the answers to just about anything, especially on appliances. I would suggest that you provide the model number so your expert will be able to provide you the best possible answer. Just click on reply below and the provide the required data.

Read More
Priscilla V -
June 25, 2012
A:

I have a Kenmore Pro gas range (freestanding dual fuel range 7962), backslpash (79627) and a range hood (5106), how do they all install and mount together? Cant find a install manual for the backsplash (5106)??? Help...sears and kenmore won't help and will not install for me???

Read More
Anonymous -
June 26, 2012
A:

There are not any specific installation instructions offered for that back splash. The one that you are describing should measure about 24" by 36". The installation will depend on the wall and counters that are behind the range. The method of securing that back splash is normally determined by the contractor that is installing it. Here is a link for the installation guide on the range hood: Kenmore Pro Range Hood 233.51063600 Installation Guide/Owner's Manual . Here is the installation guide for the Kenmore Pro gas range: Kenmore Pro Gas Range 790.79627 . Those manuals will help you see the measurements and spacing that are needed for the installation of those appliances. The back splash will be adhered to the wall behind those appliances.

I hope that this information helps. If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
June 27, 2012
See more answers

Top Parts