Model #23350303200 KENMORE ELITE Range Hood

  • Range Hood
    3 Results
Find part by diagram >

Question and Answers

Q:

KENMORE ELITE RANGE HOOD

A:

I'm sorry to hear that you are having some difficulties with your range hood. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assistance for you.

Read More
Joseph P. -
December 07, 2011
A:

Thank you for your question and I understand your concern.

I added an image below with the instructions taken from the Use and Care/Installation Manual. It says to remove the screw and then pull down on the lens to remove. We do not have a vent hood here to see for myself so I must follow the instructions in the Use and Care/Installation Manual.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
December 10, 2011
See more answers
Q:

KENMORE ELITE RANGE HOOD 23350303200

A:

I'm sorry to hear that you are having some difficulties with your range hood, its important to obtain detailed instructions to make the project much easier. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assistance for you.

Read More
Joseph P. -
December 07, 2011
A:

Thank you for your question and I understand your concern.

I added an image below with the instructions taken from the Use and Care/Installation Manual. It says to remove the screw and then pull down on the lens to remove. We do not have a vent hood here to see for myself so I must follow the instructions in the Use and Care/Installation Manual.

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Read More
Joey S -
Sears Technician
December 10, 2011
See more answers
Q:

need to order a mounting bracket to install a kenmore elite rang hood model 233233.50303200

A:

Installation differences are not uncommon but can become frustrating. I see you have checked the installation information and the correct parts list so this will take the expert to help sort out. You should receive the answer within 24-48 hours if not sooner.

Read More
Barbara H. -
September 03, 2011
A:

Thank you for your question and I understand your concern.

The pictures/images in Use and Care/Installation don't always look the same as the image at Sears PartsDirect . I'm pretty confident that the mounting bracket (key#407)part#BE3344985 is the one you need.

Read More
Joey S -
Sears Technician
September 05, 2011
A:

Dear Joey, Thanks for your answers. I received the mountain bracket today. The mounting bracket (key#407)part#BE3344985 I received was not what I want at all. The one I need is showing in the attached picture and circled in red, that I got it from the installation instruction for the range hood, Kenmore Elite Model 233.50303200. The one showing in the Parts Center web site is different from the one in the attached picture. Do you know where I can purchase the correct mounting bracket? By the way I found and downloaded the installation instruction from this link, http://www.hammerwall.com/Download_Manual/125233/ Thank you very much for your help in advance. Jim

Read More
Jim -
September 13, 2011
A:

Jim: The only way I can help you is by providing the link to the manufacturer (BROAN). I'm sure they can help you. Here is the link http://www.broan.com/display/router.asp?DocID=1

Read More
Joey S -
Sears Technician
September 14, 2011
See more answers

Top Parts