Model #2250 EPSON Printer

  • No Image Available - Wards
    3 Results
Find part by diagram >

Question and Answers

Q:

de error WM2250CW Lg Washer

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Lg washer.

I can understand the frustration of your washer not functioning properly, after researching model number WM2250CW. The DE error code you’re receiving indicates an issue with the door switch. Unplug the washer. Check the door for an obstruction. If the door is damaged, replace any defective parts. If the door is closing properly, check the door lock/switch assembly wiring. If the wiring connections are sound, replace the door lock/switch assembly. Unfortunately, there isn’t a way of narrowing it down. If you would like you can have a technician out to diagnose the problem. If not the door switch is a great place to start and will likely fix the issue.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 13, 2015
Q:

What year was this model manufactured? GLD2250RDC0 GLD2250RDC0 Frigidaire Dishwasher

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the year and consumer guide rating for your dishwasher.

 I have found the age of the dishwasher and it was made in 2004. There is a consumer warranty page on page 20 of the owner's manual, but the manufacture does not give us the consumer rating. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
May 19, 2015
Q:

Why is my Frigidaire dishwasher over flowing

A:

I'm sorry to hear that you are having some difficulties with your dishwasher. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you.

Read More
Alina F. -
December 30, 2011
A:

I saw that, but in my case the water does stop after about 2 minutes. Could it still be the value?

Read More
Daryl -
December 30, 2011
A:

Since the water continues to flow even when the float switch is opened or electricity is disconnected from the valve, this indicated that you have a bad fill valve. You can try one more test. With the dishwasher filling, shut off the house circuit breaker to completely disconnect electrical power from the entire dishwasher. If the dishwasher still fills with electricity completely disconnected then you will apparently need to replace that fill valve.

If the water stops flowing immediately after electrical power is completely disconnected from the dishwasher then there is a chance that you could have a wiring failure. There is a very remote chance that one of the wires could possibly be shorted to the metal cabinet so that voltage still reaches the solenoid when the float switch is open. This would be very unusual be it is remotely possible. You indicated that you disconnected electricity from the valve in your details. You did not indicate how you did that. That is why I mention this additional test. If you are certain that the inlet water valve still allows water to flow into the dishwasher when all power is disconnected from the valve then that component will need to be replaced.

You can order that valve assembly from the Sears PartsDirect website. Here is direct link for that part: Valve . Be sure that you shut off the washer supply and completely disconnect electrical power to the dishwasher before accessing internal components and replacing that part.

If you need more help, reply with additional details and we will assist you further.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Lyle W -
Sears Technician
January 03, 2012
A:

What year was this model manufactures?

Read More
Randy -
May 18, 2015
See more answers