Model #22422 HUNTER Ceiling Fan

  • Replacement Parts
    3 Results
  • Fan Blades
    3 Results
Find part by diagram >

Question and Answers

Q:

have a crack in tub is it hard to install new one it is worth it

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.22422100. When it comes to the tub it is a pretty difficult part to rep[lace on the unit., we normally recommend having a technician out to do the repair to you. the tub cost $113.66. The price for a technician to replace wills probably another $200 or so. So you’re looking at about $320 if you take this route. I have linked some information on how this process is done. After looking through the information if you determine it’s something you can do than I would suggest ordering the part and starting ASAP. If not you can set up service at www.Searshomeservices.com.

Click here for information on repair.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
March 17, 2015
Q:

Kenmore model 22422 top load washer spin cycle inop.

A:

The Managemylife web site is a good resource of information to find out what may be happening and what options are available to you. I'm sorry to hear about the difficulties with your Kenmore top loading washer. I did some research at Managemylife website and found this expert answer to a similar question that may help until your expert can respond. I have attached the link below so you can check it out. I also found this video at the web site to look at.

Read More
James -
November 02, 2012
A:

I know that it can be very frustrating to have issues with washer. On this model the lid has to be closed in order for the washer to spin. I recommend checking the lid switch. You should hear the lid switch click as you raise & lower the lid. If the lid switch checks good you will need a meter to track down the problem if the motor does not come on. If the motor is running but the washer will not spin please see the link attached below for more possibilities. Remember to disconnect power to the washer before attempting access.

If the lid switch is working, then the problem could be a worn clutch or basket drive. To check the clutch you will need to remove the cabinet first (see images below). Then insert an insulated jumper wire between the two colored wires for the lid switch. Once you have the jumper put in tape the jumper in place. Now start the washer in a spin cycle and look above the transmission with a flashlight. You should see the chrome drum of the clutch spin. If it is not spinning, the problem is likely. If the clutch drum is spinning, try to turn the wash basket. If the basket spins, replace the clutch. If you cannot turn the tub, the problem is likely a defective basket drive.

If you don't feel comfortable doing this yourself, just click here to schedule service: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
November 02, 2012
A:

Thanks for the troubleshooting tips. The clutch basket does not spin when the spin cycle is engaged. The motor come on and spins but not the clutch basket. Is there something in the transmission thats not working correctly since it won't engage the clutch basket? Thanks

Read More
Seth -
November 18, 2012
See more answers