Model #222 POULAN Chainsaw, Gas

  • Chassis/bar/handle
    3 Results
  • Shield/cylinder/crankshaft
    3 Results
Find part by diagram >

Question and Answers

Q:

oven and broiler no flame AgGG222VDM1

Q:

I am looking for an air filter and why does your part number comes up with a briggs & stratton part and it will not fit this maching. 358796110 Craftsman Craftsman 22.2cc gas weedwacker

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Craftsman trimmer.

From the information you have provided above, after researching model number 358.796110. I have located the proper filter for this unit. the part number for the air filter is 530024371.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
June 29, 2015
A:

This filter is square, but am I to cut it in pieces to make it fit my machine? It is too long to be able to squeezed into the small space and get the cover on.

Read More
Mary -
June 29, 2015
See more answers
Q:

Transaxle Model 222-3010L Craftsman Lawn Tractor Model 917.273021

A:

A lawn tractor is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Barbara H. -
January 07, 2012
A:

Thank you for your question.

I will be happy to assist you with this question. I have posted an image below that shows how to change the oil and filter on the transaxle. Click on the image to enlarge it. The oil used is 15W50 synthetic Mobil one oil.

Please reply below if you need further assistance on the tractor.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 08, 2012
A:

I likewise am having a problem with my Sears tractor (Model No. 917.273021) with transaxle Model No. 222-3010L -- it suddenly stopped moving. I installed a new drive belt, checked operation of the bypass valve, checked the brake, and purged the transaxle -- to no avail. Although I do not see any sign of oil leakage from the transaxle, you suggested to make sure the oil level was OK. I have not checked the oil level because I do not see where to do so -- I do not see the pipe plug on the right side of the transaxle -- which is why I was hoping that Mark T's images (provided elsewhere in this thread) might actually show where it is located -- do you have a better image that shows where this plug is located (I do not see it listed in the parts list of the owners manual)? Also, should I change the transaxle oil filter? Thanks.

Read More
Bill -
May 03, 2013
A:

Bill, I am sorry the image did not enlarge for you. I reposted it below. If you cannot see the image, I suspect you are viewing this question on the partsdirect site. If this is the case, I recommend copying and pasting the following address in your browser. http://www.managemylife.com/mmh/questions/282778-transaxle-model-2223010lcraftsman-lawn-tractor-model-917273021 Once on the site you should be able to enlarge the image. The image has the instructions for changing the oil and has trouble shooting information. I hope this is helpful. Please let me know if you need further assistance. Thanks Mark.

Read More
Mark T -
Sears Technician
May 04, 2013
A:

Thanks, Mark. Yes, I now can enlarge the image and read it. However, strangely - it will not allow me to print the entire image - is the image available as a pdf file? Thanks again.

Read More
Bill -
May 04, 2013
A:

I am sorry about the printability. We have to build these images in order to post them. The site only allows 3 PDF files. If I break them up it makes it hard to post them all. If you have a picture problem you should be able to crop and print what you need. I hope this is helpful. Please let me know if you need further assistance. Mark

Read More
Mark T -
Sears Technician
May 04, 2013
A:

I found the plug and checked the oil -- looks ok. Onto another possibility -- I understand that another possible reason for the tractor not moving is that keys in the axles that drive the rear wheels might have sheared. I believe these keys are listed as Part No. 7070E. Have you heard of this happening and, if so, what would cause the key to shear? If one or both of the keys are sheared, how difficult a job is it to replace them? Thanks again.

Read More
Bill -
May 07, 2013
A:

I am sorry you are still having a problem. It is unlikely that the axle key is sheared. I have seen them come out but never shear. To check the keys just set the parking brake. Then try to push the tractor. If one of the keys were missing, you would be able to push the tractor with the brakes on. To install a new key just remove the dust cap on the end of the axle. Then use a flat blade screwdriver to remove the clip on the axle. Next, remove the washer and push the tractor until the slot in the axle is aligned with the slot in the wheel. Once aligned, you can slide an axle key into the slot. After you have it pushed in, go ahead and put the unit back together. Please let me know what you find. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
May 08, 2013
A:

I need to know where to check the oil level on this tractor??

Read More
janie -
November 07, 2013
A:

Please advise as to where to check the oil level on this tractor? Thank you

Read More
janie -
November 07, 2013
See more answers

Top Parts