Model #217586751 CRAFTSMAN Boat Motor Gas

  • Power Head Assembly
    3 Results
  • Twist Grip Assembly
    3 Results
  • Remote Fuel Tank Assembly 93310
    3 Results
  • Column Assembly
    3 Results
  • Gear Housing Assembly
    3 Results
  • Engine Assembly Type No. 640-19ba & 640-23
    3 Results
  • Carburetor Assembly
    3 Results
  • Magneto Assembly
    3 Results
  • Rewind Starter Assem. 590420
    3 Results
Find part by diagram >

Question and Answers

Q:

Carb rebuild kit 217586751 Craftsman 7.5 h.p. outboard motor

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Boat motor.

I can understand the frustration of your motor not functioning properly, after researching model number 217.589751. Unfortunately, the carburetor and carburetor kit is an obsolete part. The manufacturer nmo longer provides this part. We only work with original manufactured parts. I would just suggest searching with part number 632363 on the internet to see if anyone has it listed or a used one available.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
July 06, 2015
Q:

Need parts info for a boat motor

A:

I'm sorry about the difficulties your having with your boat's motor. I did some research for you and found a web link that I hope will help until your expert can answer your specific question. I attached the link below. I hope the provided information is useful to you. You will need to copy and paste this to download. http://www.justanswer.com/sip/boat-repair/boat?r=ppc|ga|2|Cars+-+Boats|Boat&JCRN=Boat+Mechanics&JPKW=for%20boat&JPDC=S&JPST=&JPAD=8800921618&JPAF=txt&JPRC=1&JPMT=b&JPNW=g&JPCD=20110506&JPOP=TransAnswers&gclid=CPuYk8nz9qgCFQHsKgod6whbTQ

Read More
James -
May 20, 2011
A:

Thank you for your question.

I have looked up the shear pin for the prop but could not find a size. I found two venders listed two different sizes. I recommend ordering a kit from this link . Once you receive the kit measure the pin before installing it. Then use a sharpie to write the size on the inside of the cover.

Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 20, 2011
A:

pls. help me find a prop for a shakespeare wondertroll 606

Read More
bernard -
April 03, 2012
A:

I have searched for a prop for your trolling motor but did not have any luck. I also looked for the original specifications thinking i could match it up to another manufacturer but struck out. My recommendation is to take the trolling motor to your local repair shop to see if they can measure the shaft and match it up. I hope this is helpful. Good luck. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
April 04, 2012
A:

I need help, 7.5 Gamefisher. Does a Mercury 9.8 Impeller w/ 7/16" shaft, fit my old Gamefisher? They do not make this impeller for my Eska. I don't have old one, was nothing left of it. I don't know diameter of the old one. What I need is this: 1) The Diameter of the original. or 2) Someone who has put a Mercury Impeller on their 7.5, Gamefisher. I did all kind of calling around and research to no avail. The Impeller part #'s from Sear's (who doesn't make em anymore.) 36703 and 26511, the sub. The Mercury Impeller part # is 26511, I think. What I've put together is the Mercury 9.8, 7/16" shaft has the same impeller. Thank you, Josh

Read More
Josh -
March 27, 2014
A:

I need help, 7.5 Gamefisher. Does a Mercury 9.8 Impeller w/ 7/16" shaft, fit my old Gamefisher? They do not make this impeller for my Eska. I don't have old one, was nothing left of it. I don't know diameter of the old one. What I need is this: 1) The Diameter of the original. or 2) Someone who has put a Mercury Impeller on their 7.5, Gamefisher. I did all kind of calling around and research to no avail. The Impeller part #'s from Sear's (who doesn't make em anymore.) 36703 and 26511, the sub. The Mercury Impeller part # is 26511, I think. What I've put together is the Mercury 9.8, 7/16" shaft has the same impeller. Thank you, Josh

Read More
Josh -
March 27, 2014
See more answers
Q:

I am looking for the owners manual for a gamefisher 7.5 outboard motor. Model # 217-586751. It was made in 1984. I am looking for the engine diagrams.

A:

I know how useful parts list diagrams can be especially when doing repairs. I did some research and I was able to find a link in where you can enter the model number and a parts list diagram will pop up. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
April 23, 2012
A:

I know that it can be very helpful to have the manual for this motor. After some research, I found that this manual is not available on this website or any others for free. If you would like a copy of the manual you will need to order it. It does contain the service information you need. Just click on this link and enter your model number to order it: Sears Parts Direct . If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
April 25, 2012
See more answers

Top Parts