Model #2152 GALAXY Portable/table top Fan

  • Functional Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Dryer model GLEQ2152ELSO ERROR CODE GLEQ2152ES0 Frigidaire Dryer

Q:

I also own the washer but can't make out the model number for it. please send me that information LGQ2152ES0 Frigidaire Dryer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize we cannot give you the model number of your washer. If you purchased your washer from Sears you can call 18004MYHOME and see if they have the model number liste. It is not always guranteed that the model number is listed or is correct.
 

Common model number plate locations

  • Back of the cabinet (near the top)
  • Door frame
  • Inside the door
  • Front or side of the base unit

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 17, 2015
Q:

Top of dryer gets hot. gleq2152-es1

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Dryer.

I can understand the frustration of your dryer not functioning properly, after researching model number GLEQ2152-ES1. The most common thing to cause this issue is excessive lint build up in the unit. I would suggest to deep cleaning the unit. Make sure there isn’t any lint trapped on the inside and clean out the exhaust vent. The lint causes the dryer to over work and heat up. The other part to cause this issue is the hi limit cut off fuse. If this fuse is bad the dryer will continue to get hot. I would suggest starting with the lint and see if that fixes the issue.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
August 14, 2015
A:

Are you saying that a lint clog will cause dryer to overheat even when dryer is not in operation? If it is in operation how can dryer overheat? Thank you, Jack

Read More
Jack -
August 14, 2015
See more answers