Model #204 TROYBILT Chipper Shredder/Vacuum, Gas

  • Chipper Chute/nozzle/bag
    3 Results
  • Impeller/housing, Inner Flail
    3 Results
  • Chain Case/transmission
    3 Results
  • Handle/frame
    3 Results
Find part by diagram >

Question and Answers

Q:

Drying temperatures of Kenmore dryer Model 110.60912990. 110.60912990

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 110.60912990; the operating temperatures of your dryer will vary anywhere from 110 degrees to 175 degrees depending on the options & cycle selected. This is taking the temp reading at the exhaust outlet.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 02, 2015
Q:

dual wall ge JRP28SK1SS JRP28SK1SS

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your ovens do not work. 

THERMAL SWITCH
The thermal switch is located next to the lock motor in the normally closed position. The switch is mounted on the floor of control area.The switch opens at 243°F and closes when temperatures cool below 204°F. If the thermal switch opens during:
1. Oven Temperature Below 600°F. Program is cancelled when thermal switch opens. Lock Motor will run and the words “LOCKED” and “DOOR” will be flashing in the display. Then control will go to -F9- failure.
2. Oven Temperature Above 600°F. Any mode of operation control will go to -F2- or -F9- failure code.
When this condition exists, check the fan operation (look for obstructions), inspect oven installation (make sure grill areas are not blocked), oven insulation and lock circuit.

Oven Sensor: Terminals 4 to 6- *1100?@Rm Temp.
 2580?@ 835°F

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 07, 2015
Q:

Parts not in exploded diagram 316.73197.1

A:

Thanks for the inquiry and for being a valued member.

You're right; I do not see the starter pawl kit being listed on this unit as an individual item. On the base model of this trimmer (316.731970), the starter pawls are broken down individually and should work. The part number for them is 753-08159. I have linked them below for convenience.

Starter Pawl

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 22, 2015

Top Parts