Model #1925 WEEDEATER Blower, Gas

  • Carburetor
    3 Results
  • Blower Tube Kit
    3 Results
  • Fan Housing/shroud/blower Housing
    3 Results
  • Cylinder/muffler/crankshaft
    3 Results
  • Vac Attachment Kit - 952-711500
    3 Results
  • Gutter Attachment Kit - 952-701586
    3 Results
  • Service Reference Note(s)
    3 Results
Find part by diagram >

Question and Answers

Q:

refrigerator part failing

A:

When the Majic Chef refrigerator is not working properly, it can be a concern. While an expert responds with information specific to your model, click on the link provided below.

Read More
anna -
June 19, 2013
A:

Thank you for your question. I'm sorry you are having this problem with the fridge. The information you have received is very good. The timer in this model is located inside the control housing. The timer dial will be located in a small hole under the housing. If you would like more assistance, reply to this thread and I will be glad to assist you further.  

Read More
Scott D -
Sears Technician
June 21, 2013
See more answers
Q:

What are the mesurements of this glass?

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within two business days. Thank you for using Manage My Life.

Read More
Yadira B -
February 06, 2013
A:

I checked for any replacement glass that may be available in another color but I could not find any glass panes available in a different color. The measurements on that glass are approximately 19.25" high by 29.5" wide.

Read More
Lyle W -
Sears Technician
February 07, 2013
See more answers
Q:

1.3 gallon Pump sprayer

A:

I think its great that you are wanting to do some repairs on your own. I suggest you add to the thread of this question and include the full model number of your pressure washer so that the expert can provide you with a more detailed answer. I was able to find a link that will guide you with your repair. The expert will respond within 24 to 48 hours, thank you for your patience!

Read More
Joseph P. -
May 16, 2012
A:

Model Number for the pump sprayer = 786-15710. Thanks. Jk

Read More
jim631 -
May 16, 2012
A:

Thank you for your question.
I am sorry I did not include the instructions. On most models you have to hold the top and push in and turn the pump tube 1/4 turn counter clockwise. Then pull the tube away from the top. This is similar to a prescription bottle. We also have models that the tube threads onto the top. To take these apart you hold the top with one hand and unthread the tube with the other. I recommend taking the unit apart before ordering the kit. Just incase some thing else break when you disassemble it.
I hope this is helpful. Please let me know if you need further assistance.

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
May 20, 2012
A:

Come back to Mark T: Thanks for your guidance on how to disassemble the shaft of the pump up sprayer, Model 786-15710 so I can replace the seals. That being said, I now need you to find a local incredible hulk who has the strength to take this thing apart. My 17 year old Mr. Muscles couldn't budge the thing; I've had it on my vice giving a twist; and I've attacked it with expanding lock jaws pliers, all to no avail. I'm ready to junk the sprayer and go buy another one, but I'd rather not. What now? Thanks. JK

Read More
jim631 -
May 21, 2012
A:

I am sorry you are having a problem taking the pump apart. I think you are holding and trying to turn the same part. I posted an image below that shows a similar model taken apart. Click on the image to enlarge it. I also posted a link below that shows different models. Once on the link click on the image to see it taken apart. I hope this is helpful. Please let me know if you need further assistance. Thank you for using Manage my life. Mark.

Read More
Mark T -
Sears Technician
May 22, 2012
A:

Thanks Mark T for the quick comeback. You are getting closer with the exploded views of the pumps, but none of them are like mine. My push rod shaft and handle, with plastic grip, are all steel (that is one reason I'd like to repair this one rather than purchasing one). I'd best send you a photo, but I'll have to wait until my 17-year old can do an image -- I'm not savy on that. JK

Read More
jim631 -
May 22, 2012
See more answers