Model #19 AMANA Upright Freezer

  • Model 12
    3 Results
  • Models 12a, 12a1, 12a2
    3 Results
  • Models 12b
    3 Results
  • Model 18
    3 Results
  • Model 18a
    3 Results
  • Model 18b, 18b1, 18b2
    3 Results
  • Model 18c
    3 Results
  • Models 12e, 12f, 12g, 12h, 15, 15a, 15b, 19, 19a, 19b
    3 Results
  • Door Assembly - Models 12e, 12f, 12g, 15, 19
    3 Results
  • Door Assembly - Models 12h, 15a, 15b, 19a, 19b
    3 Results
  • Shelf, Ice Cream Unit, Condensing Unit
    3 Results
  • Cabinet And Refrigeration
    3 Results
  • Door Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Installation Parts Needed for my Kenmore Elite Cooktop 911.33213101

A:

I understand that you want to make sure you received all the parts needed with your new cooktop. I added a link below for the manual book. An expert will respond with additional information. Have a nice day!

Read More
Yadira B -
December 18, 2012
A:

Here is a link for the installation guide on that cooktop: Installation Instructions .

That cooktop does not appear to be a brand new current model. The original cooktop should have come with a regulator that is part number WB19T10078. That part is shown as Key 312 and is circled in red on the parts drawing below. You can view all of the parts for that cooktop and order any missing parts from this page: Kenmore Cooktop Model 911.33213101 Parts .

This information should help you get that cooktop installed. If you need more assistance, reply with additional details.

Read More
Lyle W -
Sears Technician
December 19, 2012
A:

Can you please send resend the installation instruction link again? That one comes on as an error. I inherited same appliance and I wish to use LP gas for it. I don't see any LP conversion kit for it and there is no mention of anything in the owners manual

Read More
samuel -
January 22, 2016
See more answers
Q:

how do you remove the light switch? 795.76203.901

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

These push button light switches will just pop out. First disconnect power to the refrigerator and then use a small screwdriver to pry the switch out. It can be a little tricky but it will come out. 

Hopefully this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
December 04, 2013
A:

Where on the switch do you insert the putty knife for removal ,front of switch facing the door or the Back side facing inside the frig. Thanks my e-mail is johnb801@yahoo.com

Read More
John -
November 17, 2014
A:

I was also having a problem with my fridge light and came across this trying to figure out how to get the light switch out without breaking it. To answer your questions about which side to pry from, you should insert your knife strait from the front. There is a tab that you push strait back and the switch will pivot out. Picture: https://www.dropbox.com/s/1apenb7e1tqucb7/2015-02-14%2014.19.47.jpg?dl=0

Read More
Brad -
February 14, 2015
A:

I,m trying to figure out if my problem is the light switch. The lights act just like others have reported - the sometimes do not come on and wiggling the switch makes them come on or go off, BUT the lights telling the temperatures of the frig and freezer operate properly with the switch and do not go off or on with wiggling the switch.

Read More
STEVEN -
January 19, 2016
See more answers
Q:

Mower won't pull start... 917370440 Craftsman Mower

A:

Thank you for choosing Sears Parts Direct.com. I appreciate you being a valued member and will be happy to assist your with your lawn mower. Upon researching model 917370440, the battery would just be for electric start. Page 11 was just for manual start. Page 19 indicates to charge battery if equipped. The battery only needs to be equipped if using electric start.  There are a couple things to check if the manual start is not working. If the unit was in storage with fuel in carburetor then it could need to be cleaned out.  The carb has tiny air holes that can clog and not allow proper air/fuel mixture. If the pull start doesn’t pull remove spark plug and see if it pulls then. If it pulls with plug out the engine could have flooded. If it doesn’t pull with plug removed then the starter could be seized. Another thing is the operator presence bar has a cable running down the side. At the end of the cable is a spring if the spring is worn out it won’t have enough tension.

If you have any further questions please re-post question. Thank you for choosing Sears we appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 07, 2014
A:

I also have this mower that will not start I have checked spark plug and spare, no spark removed magneto and tested with meter spark plug wire to killswitch connection 5600 ohms but I read 0 ohms from killswitch terminal to the mounting metal of the magneto shorted. is this a bad magneto?

Read More
Steven -
January 18, 2016
See more answers