Model #1837 KENMORE Grill, Gas

  • Replacement Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

freezer part needed. LGHT1837LP0 Frigidaire Refrigerator

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
If the compressor at the back bottom is running, the issue is likely to be the temperature control, part number is 5304421256. If the compressor is not running, the issue is likely to be the start relay, part number 241707720, or the capacitor, part number 5304464438. If you replace the start device, you should also replace the capacitor, and vice versa. 
Hopefully this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
February 13, 2014
Q:

freezer repair LGHT1837LP0 Frigidaire Refrigerator

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
If the compressor at the back bottom is running, the issue is likely to be the temperature control, part number is 5304421256. If the compressor is not running, the issue is likely to be the start relay, part number 241707720, or the capacitor, part number 5304464438. If you replace the start device, you should also replace the capacitor, and vice versa. 
Hopefully this helps and let us know if we can be of any further assistance. Thanks for using SearsPartsDirect.com. 

Read More
Jeff Wallace Sr -
Sears Technician
February 13, 2014
Q:

kenmore elite washer 1104293220

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your washer and do understand your frustration. Glad to help out. Im looking at your model number 1104293220 and from your description it sounds like the inlet valve is failing to keep or is not closing the valves all the way. The valve has solenoids that open and close the valves. It is possible that water deposites may be causing to stick or not close all the way or the solenoids may be failing.  To replace is fairly easy. First you will need to remove the hose from the inlet valve that are coming from your water supply line. Make sure you turn both hot and cold off. The top has 3 screws on the rear that will be removed and the top will slide off. The valve has 2 screws that hold it in place and will need to be removed as well the wire harness from the valve.  You will need to remove the hose clamp with a pair of pliers and this will allow you take remove the hose from the valve.  You can now install the new valve. 
 
 
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link below to be taken to the page.
 
If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com
 

Read More
Sherman_G_Wallace -
Sears Technician
February 12, 2014