Model #1820 SKIL Router

  • Router Assembly
    3 Results
Find part by diagram >

Question and Answers

Q:

Maximum recommended bar size? 358350060 Craftsman Gas chainsaw

A:

Thanks for the inquiry and for being a valued member.

You can very likely find an 18-20" bar to replace the 16" bar, but it is not recommended. The manufacturer sets the bar length to work well with the engine size. If you lengthen it, it creates more drag on the engine, and performance will take a hit. Over time this will cause the engine to wear out faster.

Swapping to a bigger bar and/or different cutting type chain is a practice that is seen more often in wood cutting industries where the saws are not the same as the consumer models. Those saws were constructed with the engineer knowing that it likely going to be ran all day for 5-7 days a week. If you do decide to go with a bigger bar make sure that bar takes the exact same chain type as your current bar unless you plan to change the sprocket.


I hope these suggestions help, and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
August 05, 2015
Q:

how to replace Drive Control Cable (Pt #746-04156 & 731-1820 o yard vac 247770990 Craftsman Yard vacuum

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your lawn vacuum and I do understand your frustration. Glad to help out. I'm looking at your model number 247770990 and page 16 of the owner’s manual provides information on adjusting the drive cable, which the direction will help with the replacement. I recommend following the old cables path so that you have an idea how to route the new cable. It may appear to be difficult but once you attempt to make the repair you will see it is as difficult to replace. Here is a link for the owner’s manual. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
November 25, 2014
Q:

Local Repair U5757-900 Hoover Wind tunnel bagless

A:

Thanks for the inquiry and for using SearsPartsDirect.com. 
Based upon zipcode 19446, the closest Sears Parts and Repair Center to you would be in Allentown, PA. at 1820 E. Race St. 18109. It's about 27 Miles. The phone number to the location is 610-266-3410. Hopefully this helps.
Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
February 05, 2014

Top Parts