Model #1705-6000W KINGCRAFT Generator

  • Cylinder Head
    3 Results
  • Cylinder Barrell
    3 Results
  • Crankcase Cover
    3 Results
  • Crankshaft
    3 Results
  • Piston Assy
    3 Results
  • Cam Shaft Assy
    3 Results
  • Recoil Starter Assy
    3 Results
  • Fan Cover Assy
    3 Results
  • Carburetor Assy
    3 Results
  • Flywheel Assy
    3 Results
  • Ignition Assy
    3 Results
  • Starter Motor
    3 Results
  • Control Assy
    3 Results
  • Muffler Assy
    3 Results
  • Air Cleaner Assy
    3 Results
  • Fuel Tank Assy
    3 Results
  • Control Panel Assy
    3 Results
  • Frame Assy
    3 Results
  • Generator Assy
    3 Results
Find part by diagram >

Question and Answers

Q:

Recoil starter replacement 1705-6000W Kingcraft Generator

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
I am sorry to hear about the failed rewind starter on the generator, I know how frustrating that is to have occur.
Based upon the Kingcraft model of 1705-6000W, I see the recoil starter part number is G13.0-G-01-JD.
For convenience, I have included a blue link below that you may click on to be directed to the PartsDirect page to view and purchase the rewind starter for this model.
The website refers to it as a spring, but if you Google the part number, you can see the image of the entire recoil assembly. Hope this helps.

Recoil Starter for Model 1705-6000W

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
March 19, 2014
A:

OK, thanks. Now my next question is, does this involve simply removing the screws holding the unit in, and then removing it. Then reversing the process to install, or is there more to it?

Read More
gary -
March 19, 2014
A:

The original rewind starter assembly may have rivets holding it in place. If so, just use a small straight edge screwdriver to pry the old rivets off, they will usually just come off with a little pressure. However, if there are screws holding it on, just hang on to those and reuse them when the new starter comes in if the kit doesn't have the screws, but usually the replacement rewind starters also include hardware for applications where rivets were used in the factory. It's plug and play, and pretty simple to install. Hope it works out for you.

Read More
Jeff Wallace Sr -
Sears Technician
March 20, 2014
See more answers
Q:

wiring diagram for generator 1705-6000W Kingcraft Generator

A:

Check on the machine and in the manual to see if there is a number listed for Kingcraft. I have no information, other than parts information, for these machines. I don't even have a copy of the manual to see if there is any contact information listed or not. I have read online that the manual has a contact number and that they are very helpful in getting any issues resolved.

Thank you for using Manage My Life!

Read More
Wade_B -
Sears Technician
September 02, 2013
Q:

Electrical Drawing for King Craft Generator

A:

Needing a diagram is great to have. While you are waiting on an expert to answer your question, I was searching in the Sears Parts Direct website and found your diagram. I have attached the link below. Hope this helps!

Read More
Dezeray S -
April 09, 2011
A:

I have been to that link. It does not show a drawing for the wireing. It just shows the parts

Read More
Ralph -
April 09, 2011
A:

Thank you for your question.

I can understand wanting to have the model number for the generator.

Somewhere on the generator and or the owners manual is the model number of the product and without that number I cannot supply you a wiring diagram.

Please reply with the model number information and I will be glad to help you get the wiring diagram.

I think it may be model APG3009 if you can find that to verify I will contact the manufacture to get the wiring diagram for you.

Thank for using Manage My Life.

Read More
Sam A -
Sears Technician
April 11, 2011
A:

I have the same request. I believe the model # is APG3012. All of the parts are identified with an APA Part No. (i.e. APG3012-G-01-JD for the Recoil Starter Assy. Part No. JF168-G-01)

Read More
sherloct -
November 27, 2011
A:

Update on the wiring request. I am sorry but at this time I only have the diagram in Chinese. It is very basic and the wire colors can be matched from the color code matrix on the bottom left of the diagram. I hope this will be of some help until I can get the complete English version. Sam A.

Read More
Sam A -
Sears Technician
November 28, 2011
A:

Dear Sirs Would you send me the wiring diagram for the King Craft Generator #1705 6000W which in Sam A reply.

Read More
j -
August 13, 2013
See more answers