Model #1695539 MURRAY Snowthrower, Gas

  • Engine
    3 Results
  • Frame
    3 Results
  • Drive
    3 Results
  • Auger Housing
    3 Results
  • Discharge Chute
    3 Results
  • Handle
    3 Results
  • Shift Yoke
    3 Results
  • Chute Rod
    3 Results
  • Control Panel
    3 Results
  • Decals
    3 Results
  • Gear Case
    3 Results
  • Wheels
    3 Results
  • Hardware Id/torque Specs
    3 Results
Find part by diagram >

Question and Answers

Q:

Will not self propel 1695539

A:

Thank you for choosing Sears Parts Direct.com. I appreciate you being a valued customer and I will be happy to assist with your snow thrower. Upon researching model 1695539, I found there is a spring that’s used for the tensioner pulley. Check the spring it could have loss some tension and is not strong enough to put tension on the belt. Also there is a friction wheel and friction pulley that is also used to drive the unit. The pulley has a rubber edge. The edge runs on the friction disk and over time the rubber wears out. Once it wears out the pulley would have to be replaced. I linked the diagram below.

Click here for diagram. Number 212 is friction disc. Number 223 is friction pulley.

If you have any further questions please re-post. Thank you for choosing Sears. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
July 25, 2014

Top Parts