Model #16533 TANDY VCR

  • No Image Available - Fidelitone
    3 Results
Find part by diagram >

Question and Answers

Q:

connecting rod failures x8 now 919.16533

A:

the check valve on the tank has failed. pressure from tank is on the pistons on start up.had the same problem. broken rods .took me a few times repairing compressor. replaced check valve now works fine.

Read More
robert -
May 04, 2015
Q:

My Kenmore Dishwasher has stopped cleaning properly.

A:

I am sorry that you are having some difficulties with your dishwasher and I will be happy to help. I did some research and I was able to find a link with a similar question. I hope this helps with your research while you wait for your expert response. 

Read More
Joseph P. -
March 19, 2013
A:

I know that it can be very frustrating to have issue with your dishwasher. Generally speaking, the dishwasher needs 3 things;
  1. 120 degree minimum entering the tub.
  2. Detergent
  3. Mechanical action of the pump spraying water on the dishes.

You did not indicate if the dishwasher is filling with the normal amount of water or not. If the dishwasher is not filling with enough hot water, it will not clean properly. If it's filling with the normal amount of hot water, and you not using too little or too much detergent, then it may need a cleaning. There are several types of dishwasher cleaners on the market. You can find the dishwasher cleaners located next to the dishwasher detergents in you local grocery store. Try running a cycle with the cleaner and be sure your water temperature is set at a minimum of 120 degrees. If everything is working, then it is most likely that you have a clogged drain filter or a clogged chopper blade and they need to be cleaned.  The image below will show you how to access and clean them.  If you do not feel comfortable doing this yourself, just click on this link to schedule service: Sears Home Services .  I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.

Read More
AnneJ -
Sears Technician
March 20, 2013
See more answers
Q:

Need Owners Manual for Sears Craftsman Air Compressor, Model 919 16533 CL 1019, 240 VAC

A:

Owners manuals are the greatest things to have when it comes to troubleshooting your appliance or tool. While you are waiting on a response from the experts, I was searching the Manage My Life website and found your owners manual. I have attached the link below. Have a nice day!

Read More
Dezeray -
June 27, 2012
A:

Hi Dezeray, Thanks for the response but the link you provided was for the Parts Manual and not the User Manual. The Parts Manual is helpful when ordering parts for a repair but does not contain the information required for general operations of the unit...I am giving the air compressor to a friend and would like to provide them with a users manual as they have limited experience with an air compressor. Thanks,

Read More
Frank -
June 27, 2012
A:

Hello Frank. I see the model number for your compressor is only bringing up the parts list manual. I looked up the part number for the owner's manual and see that it brings up the manual for your model on our site. I provided you with a direct link to the manual below. I hope this helps.

Owner's Manual

Read More
Korinna S -
Sears Technician
June 29, 2012
See more answers