Model #1646 SABRE/JOHN DEERE Lawn, Tractor

  • Hood And Grille
    3 Results
  • Frame And Seat
    3 Results
  • Console,tank,steering&lever
    3 Results
  • Engine Heat Shields
    3 Results
  • Front Axle And Wheels
    3 Results
  • Rear Wheels And Tires
    3 Results
  • Mower Deck Lift
    3 Results
  • Mower Deck 46"
    3 Results
  • Brake And Clutch Linkage
    3 Results
  • Belt Drive And Idlers
    3 Results
  • Transaxle Case
    3 Results
  • Center Case
    3 Results
  • Range, Shift, Pump, And Motor
    3 Results
  • Differential And Rear Axle
    3 Results
  • Shifter
    3 Results
  • Transaxle Brake
    3 Results
  • Electrical System Components
    3 Results
  • Fuel Line, Muffler, Drive Sheave
    3 Results
Find part by diagram >

Question and Answers

Q:

where can I find fuel line parts for my Generac 5550 generator

A:

Hey, I noticed that you are trying to locate a part for your generator. While you are waiting for an expert to answer your question, If you would like to you can visit SearsPartsDirect.com I have provided you with the link below. Hope this helps!

Read More
Salina L -
July 10, 2010
A:

I believe the part you are looking for is 192980GS for $11.06 and is available at Sears Parts Direct .

I've located your Parts Manual , just click on the link.

If you do not feel confident repairing this problem yourself, then you can have it repaired by a Sears technician. Here is a link that will provide the nearest drop-off locations: Sears Home Services .

I hope this helps.

If I can be of further assistance please feel free to submit any questions you have along with the specifics.

Thanks for using Manage My Life.

Ed R.

Read More
Ed R. - Personal Solutions Manager -
Sears Technician
July 13, 2010
A:

I'm having the same problem. Looking for just the rubber grommet, I don't need the whole valve assembly. Should be just a $2.00 part. I've looked at local hardwares and auto parts places, but no luck. Would a small engine repair shop have something that would work?

Read More
Jeff -
June 16, 2011
See more answers
Q:

Where does the spinner go in a Kenmore model 665.1646 dishwasher and what is its purpose?

A:

The third level spinner attaches to the water feed tube located at the top of the tub. (See images below) It connects and fastens by a two part push it type fastener. When the dishwasher pump is operating water passes up the rear feed tube and sprays out of the third level spinner. The spinner provides a weak spray front the top downwards to rinse and wash/rinse any remaining residue from the top of the dishes/glasses placed on the upper rack as well as rinsing off any residue from the walls of the tub. The two lower spray arms that spray water upwards from under the racks are actually the two that will do the majority of the cleaning with significant water pressure compared to the upper spinner.

Read More
Joey S -
Sears Technician
March 11, 2010
Q:

Can you give me disassembly instructions for my dishwasher?

A:

I have included a set of illustrated instructions (See below) that should guide you through the teardown of your dishwasher.

If you require further assistance please resubmit question with more details. I will be looking forward to helping you again in the near future.

Read More
Landell -
Sears Technician
February 03, 2010