Model #1534 BOSCH Shear Attachment

  • Unit Parts
    3 Results
Find part by diagram >

Question and Answers

Q:

Help with MW and Trim kit selection

A:

Having the right trim kit for the microwave is important. I did some research but was not able to find a solution. Your expert will be able to help answer your question. It may take two business days for your expert to reply. I do hope that everything works out on the microwave trim kit.

Read More
Marc -
July 30, 2013
A:

Thanks for contacting manage my life about changing the microwave. There will be no current unit that will perfectly fit the cut out that was made for the older Jenn air unit. Any replacement will require modifications to the cabinet cut out. If you could provide the actual model number (not a stock number or item number) of the MW you are purchasing I may be able to provide more details. Installation is also available through our Sears Services.  Ron H.  

Read More
Ron H -
Sears Technician
August 01, 2013
See more answers
Q:

Built-in Microwave Application

A:

I know this type of information can be very helpful for you to have. While you are waiting for your expert answer, I did some research on the unit. I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information. Thank you for using Manage My Life.

Read More
Joseph P. -
October 18, 2011
A:

That microwave 22-86003 (full Kenmore model 721.86003) is a microhood that is not designed for use with a trim kit. That microwave is designed to be installed over a cook top or range. Here is a link for the installation guide on that microwave: Installation Instructions . That Trim Kit model 64003 is designed for use with a counter top microwave. The current models of counter top Kenmore microwaves that should be compatible with that trim kit are:

  • 69123
  • 79153
  • 79203
  • 67903

Here is a Sears.com link for the model 69123 (full model number 721.69123): Kenmore 1.2 cu. ft. Countertop Microwave 6912 .

I provided the instructions for that trim kit in the images below (4 pages).

I hope that this information helps. It appears that the Sears salesperson made a mistake regarding the compatibility of microwave 22-86003 with that trim kit.

If you need more assistance, let us know.

Read More
Lyle W -
Sears Technician
October 19, 2011
A:

Here is the 4th page of the installation instructions for the trim kit.

Read More
Lyle W -
Sears Technician
October 19, 2011
A:

Lyle, thank you so very much for your help! This takes care of it!

Read More
RON -
October 25, 2011
A:

Hi, I am repalcing a broken Jen Aire built-in MW installed over a Frigidare oven. I currently have a trim of dimensions [internal - 23-5/16" width x 12-1/2" height; outside - 29-3/4" width x 17" height]. The cut out is 15-3/4" high x 26" wide. The oven below has a trim 29-3/4" wide, so that needs be matched. Sears suggested to use Kenmore Elite 2 cft MW 207920300. This has dimensions of h:13.53" x w: 23.87" x d: 19.81". Thus, my existing kit won't work. I see that you are proposing to use a kit 64003 with above MW. However, I read above in one of the answers that this kit is 19" high (assuming the width would still be about 30"), which is 2" taller than my current trim. Does MW needs be raised from the cabinet base to center the trim in the cut out? If centered, there is an additional inch at the top and bottom. How much clearance from the oven below is then needed for this trim to work? My current MW had some metallic fixtures at the back to direct move hot air from rear of MW to front thru the louvers in the kit. Is that something I would need with the new MW and trim kit? Thanks!

Read More
Azfar -
July 30, 2013
A:

Azfar: Based on your information, you will need to raise and center the microwave but I can't be certain how it would look compared to the existing oven trim. As long as it air space around the microwave and a way to vent through the trim kit, it will likely be Okay. Without being able to see the trim kit and the opening, it would be near impossible to say if it would work or vent properly.

Read More
Joey S -
Sears Technician
July 31, 2013
See more answers
Q:

Kenmore Window AC won't change temp from 50degrees

A:

I know how important it is to have a good working ac unit to keep your home nice and cool. While you are waiting for your expert answer, I did manage to find two links that will provide you with some good information to help you with your question. I hope my links are useful.

Read More
Joseph P. -
July 20, 2011
A:

You must be some kind of robot? Both of those links refer to central air and not a window unit. Thanks, regardless, for the reply!

Read More
robert -
July 20, 2011
A:

If you replaced the part number 5304417135 control board, the thermistor that is attached to the evaporator coil is probably bad. The thermistor senses the temperature and relays it to the control board. If the thermistor is sending the wrong information, the control board won't accept it.

The part number of the thermistor is 5304415035, and the price is $15.34. You can order the thermistor at Parts Direct

Read More
Jimmy K -
Sears Technician
July 22, 2011
A:

Jimmy -- Thanks for the reply. I did not replace 5304417135 -- I only replaced the "buttons" but not the control board behind them. The control board is more expensive than a new AC unit..... Any chance it could be the $15 part and not the whole control board? (Which seems to function besides not changing the temp....)

Read More
robert -
July 22, 2011
A:

Also -- Are you sure that your part numbers are correct? I'm looking at the diagrams for my model on parts direct and it looks like mine has the thermistor built into the control board (which is why it's so expensive.) Can you please double check that you were looking at a diagram for unit 25370125000?

Read More
robert -
July 22, 2011
A:

robert, I apologize for my mistake. The thermistor on your air conditioner is a part of the control board. I agree the control board is pricey. Sounds like you are going to be shopping for a new air conditioner.

Read More
Jimmy K -
Sears Technician
July 22, 2011
See more answers