Model #153339160 KENMORE Water heater, Gas

  • Gas Water Heater
    3 Results
Find part by diagram >

Question and Answers

Q:

Pilot not staying lit on Kenmore gas water heater 153.339160

Q:

Power Miserr 9 Flame is not on burner but all through the combustion chamber?

A:

I understand that you are having a problem with your burners lighting all through your combustion chamber. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina F. -
February 14, 2012
A:

Thank you for your question. I'm sorry you are having this problem with your water heater. A clean water heater and water heater environment are the first things that should be considered when troubleshooting a FVIR water heater for pilot outage. Government regulations for higher efficiency and new flammable vapor ignition resistance requirements have made today�s water heaters more sensitive to the need for proper air flow around and through the appliance. A dirty environment can affect a water heater�s performance. Take time to make sure that the area around, and under the heater is clean and obstruction free. Make sure that the air intake screen(s) (LDO screens) located on the base ring of the heater are clean and properly installed; this is where all of the combustion air enters the heater. I'm attaching some pictures with instructions for cleaning this type of water heater. I hope this will help you. These water heaters can be complex and when not working properly can be very dangerous. All gas water heaters can be dangerous when not working properly. I would recommend having a technician check and make the necessary repairs. I hope this will help you.

Read More
Scott D -
Sears Technician
February 15, 2012
See more answers

Top Parts