Model #153336862 KENMORE Water heater, Gas

  • Water Heater
    3 Results
Find part by diagram >

Question and Answers

Q:

Pilot won't stay lit 153336862 Kenmore Water heater

A:

Thank you for choosing SearsPartsDirect.com. I understand how frustrating it can be when the water heater pilot light does not stay lit. Be sure to clean the air intake screen as it will restrict air flow when dirty. I have included an image below on how to troubleshoot this issue. If you are viewing this response on Sears PartsDirect and are unable to view the image, copy and paste the following web address to a seperate internet browser:
http://www.managemylife.com/mmh/questions/362185-pilot-stay-lit-153336862-kenmore-water-heater
Pilot outage with water heaters can be a difficult problem to diagnose. It could be caused by the igniter, burner or valve. I recommend having a Sears technician at 1-800-469-4663 to take a look and determine what the cause is. Here is a link for the website: Sears Home Services
If you have further questions please let me know. Thanks for using SearsPartsDirect.com.

Read More
Lokelani -
Sears Technician
September 24, 2013
Q:

Why won't the pilot stay lit on my Kenmore Power Miser 6 model #153.336862, purchased 09/07?

A:

If you have replaced the complete pilot assembly and the flame goes out as soon as you release the knob on the gas valve it would indicate the gas valve is defective. If the flame stayed on for awhile then it could be due to some other possibilities. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician

Top Parts