Model #153329363 KENMORE Water heater, Electric

  • Water Heater
    3 Results
Find part by diagram >

Question and Answers

Q:

model 153.329363 water heater, I have hot water pumping out the top where it looks like the Primary Anode Rod is located. Whats up 153329563 Kenmore Water heater

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your water heater and I do understand your frustration. Glad to help out. I'm looking at your model number 153329363 and when the rod itself becomes so corroded that it can no longer do its job, the tank soon rusts out, leaks and needs replacement. However, if you replace your anode rod before it fails, about every five years, you can double the life of your water heater. Rods are made from magnesium, aluminum or aluminum/zinc alloy. Here is a link that may help with the replacement. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 18, 2014

Top Parts