Model #153326560 KENMORE Water heater, Electric

  • Water Heater
    3 Results
Find part by diagram >

Question and Answers

Q:

Hot Water Heater not heating water

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, without a model number, I cannot provide specifics. However, if pressing the reset on the thermal switch causes the water heater to heat, that thermostat with switch may need replacement. That would be the most logical component to look at. 

If you would feel more confident have a Sears Home Service technician help assist with the diagnosis/repair, you can call 1-800-469-4663, or click here to be directed to the page to set up service.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
October 21, 2014
A:

My hot water heater is a Kenmore Power Miser 6 and the model number is 153.326560.

Read More
Joy -
October 21, 2014
See more answers
Q:

I own the Kenmore Power Miser 6 - #153.326560 153326560 Kenmore Water heater

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014
Q:

Should I replace my water heater thermostat?

A:

I am sorry that you are having some difficulties with your water heater and I will be happy to help. I did some research and I was able to find two links that will provide you with some good information. I hope this helps while you wait for your expert response.

Read More
Joseph P. -
May 07, 2012
A:

Thank you for using Manage My Life. It looks as if you are going to need two new thermostats and at the very least, a new heating element gasket to prevent more water from leaking into the electrical compartment. Anytime that you need to replace a thermostat, it is almost a requirement to replace both at the same time. It is more cost effective and from the sound of it, both thermostats need to be replaced.

I also suggest draining and flushing the tank unless that was done within the last 12 months. While the tank is empty and if the elements are not completely rusted to the tank, I would also remove and inspect the heating elements. If they appear to have heavy sediment buildup (this can cause them to overheat), replace both of the elements.

If you just want the thermostats and gasket, click the following link.

Sears Parts Direct

Read More
Andrew D -
Sears Technician
May 08, 2012
See more answers

Top Parts